Startech.com 25SAT35HDD, EAN: 0065030854856

Startech.com 25SAT35HDD SATA Hard Drive Converter 2.5 to 3.5 in

Computer-Components > Controller > IDE/ATA & SATA

Startech.com 25SAT35HDD SATA Hard Drive Converter 2.5 to 3.5 in

Lieske Part No. 269192
Mfg Part No 25SAT35HDD
EAN-Code 0065030854856
Manufacturer Startech.com
Here only 26,25 EUR
31,24 EUR incl. VAT

Further information for Startech.com 25SAT35HDD SATA Hard Drive Converter 2.5 to 3.5 in

Features
Size (imperial)8.89 cm (3.5")
TypeStorage drive tray
Product colourBlack, Silver
Number of HDDs supported1
HDD size2.5"
MaterialAluminium, Plastic
Supported storage drive heights12.5 mm
Data transfer rate6 Gbit/s
CertificationFCC, REACH
Logistics data
Products per master (outer) case32 pc(s)
Master (outer) case width344 mm
Master (outer) case length320 mm
Master (outer) case height267 mm
Harmonized System (HS) code84733080
Operational conditions
Storage temperature (T-T)5 - 55 °C
Operating temperature (T-T)5 - 55 °C
Operating relative humidity (H-H)5 - 85%
Packaging content
Cables includedSATA
Screws includedYes
ManualYes
Packaging data
Package width163 mm
Package depth113 mm
Package height38 mm
Package weight260 g
Technical details
Compliance certificatesRoHS
Weight & dimensions
Width102 mm
Depth146 mm
Height36 mm
Weight260 g
The Startech.com 25SAT35HDD is a storage drive enclosure made of aluminium and plastic, which converts a 2.5-inch SATA hard disk drive (HDD) or a Solid State Drive (SSD) into a 3.5-inch format. The housing is specifically designed for use in desktop enclosures, backplane systems, or docking stations, where a standard 3.5-inch drive is required. It enables the use of smaller, energy-efficient, and often faster 2.5-inch drives instead of larger 3.5-inch modules, saving space and optimising system performance.

Applications
This adapter is ideal for IT professionals and system administrators who wish to upgrade existing 3.5-inch bays in desktop computers or servers with modern 2.5-inch SSDs or HDDs. It is also suitable for reusing laptop hard drives in desktop systems or as part of a hot-swap storage solution. The design allows for drive replacement without tools, simplifying maintenance and upgrades.

Features and Equipment in Detail
The enclosure has the same dimensions as a standard 3.5-inch drive (102 mm width, 146 mm depth, 36 mm height) and provides the necessary mounting points as well as SATA connectors at identical positions. It supports SATA I/II/III drives with a maximum data transfer rate of 6 Gbit/s. The maximum height of the installed drive is 12.5 mm, ensuring compatibility with a wide range of 2.5-inch SSDs and HDDs. The tested maximum capacity is up to 1 TB and 7200 RPM for hard drives.

Technology Explained Simply
The adapter functions as a mechanical and electrical interface. It handles the physical mounting and power/data transmission via a SATA combo connector (7+15-pin), which supplies both data and power through the cable (similar to PoE, but here for SATA). Power supply is via 5 V DC, enabling connection to standard computer power supplies. The construction from aluminium and plastic ensures sufficient heat dissipation and mechanical stability.

Compatibility and Accessories
The device is compatible with all 2.5-inch SATA drives that comply with the height limit of 12.5 mm. It is not designed for optical drives or other form factors. The use of SATA-III drives is possible, as the adapter supports the maximum bandwidth of 6 Gbit/s. The delivery includes the adapter enclosure, a screw set, and an installation guide.

Installation and Mounting
Installation is tool-free. The enclosure is inserted into the 3.5-inch bay, with integrated mounting points enabling secure fastening. The SATA connection is directly attached to the system backplane or motherboard. The mounting process is rated for 500 opening cycles (lid) and 50,000 mating cycles (SATA connector), ensuring high mechanical durability.

Operational Advantages
Using the 25SAT35HDD enables flexible use of 2.5-inch drives in systems originally designed for 3.5-inch modules. This leads to reduced power consumption, lower heat generation, and often a longer drive lifespan, especially with SSDs. The tool-free mounting and easy integration into existing systems increase efficiency during maintenance and upgrade procedures. The warranty is two years, including lifetime technical support.

Certifications and Environmental Conditions
The device complies with FCC, REACH, and RoHS standards. It is designed for operating temperatures from 5 to 55 °C and relative humidity from 5 to 85 %. Storage conditions are within the same temperature and humidity range. The colour scheme is black and silver, allowing seamless integration into standard computer enclosures.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/269192
qrcode für Startech.com 25SAT35HDD SATA Hard Drive Converter 2.5 to 3.5 in