Softing IT Networks WX_AD_TERACHKIT2,228051, EAN: 0657795068007

Softing WX_AD_TERACHKIT2 TERA Channel test adapter Class FA/Cat. 7A 1 pair

Measurement > Network Analyzers

Softing WX_AD_TERACHKIT2 TERA Channel test adapter Class FA/Cat. 7A 1 pair

Lieske Part No. 1788621
Mfg Part No WX_AD_TERACHKIT2,228051
EAN-Code 0657795068007
Manufacturer Softing IT Networks
Here only 512,32 EUR
609,66 EUR incl. VAT

Further information for Softing WX_AD_TERACHKIT2 TERA Channel test adapter Class FA/Cat. 7A 1 pair

General
Cable classFA/Kat. 7A
Number of adapters1 pair
Field calibrationincluding 2 m test cable
Test standardClass F/FA Channel test
The TERA Channel test adapter from Softing IT Networks is a specialised adapter for testing network cable channels according to the classification FA/Cat. 7A. It serves as an interface for testing channels of class F/FA and is particularly used in conjunction with WireXpert testing technology. The adapter enables precise measurement of cable channels in the field, with measurements taken under real conditions to validate the performance of the installation. It is designed for use in professional network installations, especially in environments with high requirements for data transmission quality.

Applications

The test adapter is primarily used in the installation and maintenance of structured cabling systems, particularly for testing cable channels in accordance with ISO/IEC 11801 and EN 50173 standards. It is suitable for testing cables of category 7A, designed for high data rates and frequencies. Applications include office buildings, data centres, industrial facilities, and other environments requiring reliable and high-quality network infrastructure. Testing is performed in the field, directly on the installed cable channel, to determine actual performance parameters.

Functions and Equipment in Detail

The adapter consists of a pair of test adapters connected to the ends of the cable channel to be tested. It is specifically designed for testing channels of class FA/Cat. 7A, with measurements covering the entire channel length including all connections and connectors. The integrated interface enables communication with a network testing device, such as a WireXpert tester, to capture and evaluate measurement data. A key component of the delivery scope is a 2-metre test cable used for so-called field calibration. This calibration is performed directly at the installation site to ensure measurement accuracy under real conditions.

Technology Explained Simply

The function of the TERA Channel test adapter is based on the precise measurement of the electrical and physical properties of a cable channel. Parameters such as attenuation, impedance, crosstalk, and other key values are measured, which are critical for compliance with FA/Cat. 7A standards. The measurement is carried out over the entire channel length, with the adapter providing the connection between the testing device and the cable channel. Field calibration using the included 2-metre test cable is used to adjust the measuring instruments under real conditions, thereby increasing the accuracy of the results. This is particularly important, as small deviations in installation or connection techniques can affect measurement results.

Compatibility and Accessories

The TERA Channel test adapter is specifically developed for use with WireXpert testing devices from Softing IT Networks. It is designed for testing cable channels of class FA/Cat. 7A and supports the relevant standards.

Mounting and Installation

Installation is performed by connecting the two adapters to the ends of the cable channel to be tested. The adapters are connected to the corresponding connectors, ensuring correct polarity and secure connection. Field calibration is carried out by connecting the 2-metre test cable to the testing device and then performing the calibration. The exact procedure follows the operating instructions of the testing device. No special tools or additional components are required.

Advantages in Operation

Using the TERA Channel test adapter enables precise and reliable testing of cable channels under real conditions. Field calibration increases measurement accuracy and reduces error sources caused by varying environmental conditions. Compatibility with WireXpert testing devices ensures seamless integration into existing testing processes. The simple handling and direct use at the installation site reduce testing time and increase the efficiency of network installations. Testing is performed in accordance with applicable standards, facilitating quality assurance and documentation of the installation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1788621
qrcode für Softing WX_AD_TERACHKIT2 TERA Channel test adapter Class FA/Cat. 7A 1 pair