The WX-AD-TERACH2 from Softing IT Networks is a TERA Channel test adapter of class FA / Cat. 7A, specifically developed for testing network cables in the high-speed range. It serves as an interface for testing channels according to the classification Class F and Class FA, which are required for data transmission in modern networks with high bandwidths. The adapter is used in conjunction with the Psiber WireXpert test device to check the performance and quality of cable channels in structured cabling systems. It enables precise measurement of parameters such as impedance, attenuation, NEXT, and Return Loss, which are crucial for compliance with standards and the functional reliability of networks.

Applications

The test adapter is designed for use in professional IT infrastructures, particularly in environments requiring high data rates and reliability, such as data centers, corporate networks, or during the installation of Gigabit and 10-Gigabit Ethernet connections. It is used to verify the conformity of cable channels with the standards for Class FA and Cat. 7A, which are designed for frequencies up to 1000 MHz. The application typically occurs during installations, maintenance work, or certification of cabling systems according to international standards.

Functions and Equipment in Detail

The WX-AD-TERACH2 is a TERA Channel adapter designed as a 1-pair adapter. It features a special interface optimized for testing channels according to Class F and Class FA. This interface ensures precise and reproducible measurement of the electrical properties of the cable channel, thereby minimizing error sources caused by dirty or inaccurate connections. The use of this adapter is necessary to fully verify the specifications of Class FA and Cat. 7A, which exceed the requirements of common categories.

Technology Explained Simply

The adapter functions as a mechanical and electrical interface between the test device and the cable channel to be tested. It enables measurement of line parameters under realistic conditions by simulating the physical structure of the channel. Class FA and Cat. 7A refer to the highest requirements for the performance of cable channels in structured cabling. These classes are designed for frequencies up to 1000 MHz and require very high impedance stability as well as minimal signal distortion. The adapter ensures that the measurement results correspond to actual operating conditions, thus enabling a reliable assessment of channel quality.

Compatibility and Accessories

The WX-AD-TERACH2 is specifically developed for use with the Psiber WireXpert test device from Softing IT Networks. It is designed as a TERA Channel adapter for testing channels of Class FA / Cat. 7A and is used in conjunction with other components of the test device to perform a complete analysis of the cabling.

Mounting and Installation

Installation is carried out by directly connecting the adapter to the test device and then connecting it to the cable channel to be tested. No additional tools or mounting aids are required. Installation is typically performed by specialists in IT infrastructure or network installation who are familiar with testing procedures and standard requirements. Handling is carried out according to the instructions of the test device and the specific requirements of the respective cabling systems.

Advantages in Operation

Using the WX-AD-TERACH2 ensures precise and standard-compliant testing of cable channels, which is required for compliance with Class FA and Cat. 7A standards. The measurement results are reproducible and allow for a reliable assessment of the cabling's performance. This reduces the risk of errors during installation and ensures high quality of the network infrastructure. Using the adapter is a crucial step in ensuring the functionality and reliability of high-speed networks.