| General |
| Product type | Measurement adapter |
| Norm | Class F / Class FA |
| Category | Cat. 7A |
| Plug connection | GG45/ARJ45 |
| Test mode | Permanent Link |
| Scope of delivery | 1 pair |
The test adapter from Softing IT Networks, type WX_AD_GGARJCH2,228006, is a specific accessory for network and cable testing systems, particularly for use with WireXpert testing devices. It is designed for testing
cable channels (Channel) according to the standards
Class F and
Class FA, also referred to as
Category 7A. The adapter enables precise measurement of cable parameters in high-speed networks, especially in environments requiring high bandwidth and low signal distortion. It is designed for use in the installation and maintenance of structured cabling systems, where strict electrical and mechanical specifications must be met.
Applications
The adapter is used to check the quality of
cable channels in networks meeting the requirements of
Class FA / Cat. 7A. This includes applications in high-speed networks, such as 10 Gigabit Ethernet and beyond, where signal integrity and electromagnetic compatibility (EMC) are critical. It is suitable for testing cabling systems in office buildings, data centres, industrial facilities, and other environments where reliable and high-performance data transmission is required. Testing is performed in
Permanent Link mode, with the adapter attached to both ends of the cable under test to evaluate the performance of the entire channel.
Functions and Equipment in Detail
The test adapter is designed as a
GG45/ARJ45 Channel Test Adapter, meaning it is equipped with a
GG45 connector (also known as
RJ45 connector) at both ends. This plug connection ensures a secure and mechanically stable connection to the cable under test. The adapter is designed for testing
cable channels (Channel), with testing performed according to the standards
Class F and
Class FA.
Class FA (also
Category 7A) defines the highest requirements for the electrical properties of cables, particularly regarding bandwidth, attenuation, and crosstalk. The adapter is designed for use in
Permanent Link tests, where the cable connection between two devices (e.g. switch and end device) is tested without additional plug connections in the test channel.
Technology Explained Simply
The adapter enables measurement of electrical parameters such as attenuation, Return Loss, NEXT (Near-End Crosstalk), and other indicators relevant for assessing signal quality in a network channel.
Class FA / Cat. 7A requires a bandwidth of at least 1000 MHz, which is necessary for data transmission in high-speed networks. The adapter ensures that the measurement is performed under realistic conditions by taking into account the physical properties of the cable and plug connections. The use of the
GG45/ARJ45 connector ensures a mechanically stable and electrically clean connection that does not distort the measurement results. Testing is performed in
Permanent Link mode, meaning the adapter is attached to both ends of the cable under test to evaluate the performance of the entire channel.
Testing is performed in
Permanent Link mode, with the adapter attached to both ends of the cable under test to evaluate the performance of the entire channel.
Class FA / Cat. 7A requires a bandwidth of at least 1000 MHz, which is necessary for data transmission in high-speed networks. The adapter ensures that the measurement is performed under realistic conditions by taking into account the physical properties of the cable and plug connections. The use of the
GG45/ARJ45 connector ensures a mechanically stable and electrically clean connection that does not distort the measurement results.
Compatibility and Accessories
The adapter is specifically developed for use with
WireXpert testing devices from Softing IT Networks. It is part of the accessories for testing
cable channels (Channel) according to
Class F / Class FA. It is supplied as
1 pair (i.e. two adapters), meaning one adapter is attached to each end of the cable under test. Compatibility is limited to testing
cable channels (Channel), not individual cables or other configurations. Testing is performed in
Permanent Link mode, with the adapter establishing the plug connection between the testing device and the cable.
Installation and Mounting
Mounting is done by simply plugging the adapter onto the ends of the cable under test. The plug connection is mechanically stable and requires no additional tools. Installation is performed directly on the cable, with the plug connection needing to be secure and tight to ensure reliable measurement. Testing is then carried out using the WireXpert testing device, which connects to the cable via the adapters. Measurement is performed in
Permanent Link mode, with the adapters establishing the connection between the testing device and the cable.
Operational Advantages
The use of the adapter enables precise and reliable testing of
cable channels (Channel) according to
Class FA / Cat. 7A. The use of the
GG45/ARJ45 connector ensures a mechanically stable and electrically clean connection that does not distort the measurement results. Testing in
Permanent Link mode allows for a realistic evaluation of cable performance under operating conditions. Compliance with the standards
Class F / Class FA ensures compatibility with high-speed networks and the reliability of data transmission. The use of the adapter reduces error susceptibility during testing, as the plug connection is made directly on the cable and no additional connections are present in the test channel.