Softing IT Networks WX_AD_COAX2,228017, EAN: 0046382252477

Softing WX_AD_COAX2,228017 coax test adapter 1 pair

Measurement > Network Analyzers

Softing WX_AD_COAX2,228017 coax test adapter 1 pair

Lieske Part No. 1165930
Mfg Part No WX_AD_COAX2,228017
EAN-Code 0046382252477
Manufacturer Softing IT Networks
Here only 844,87 EUR
1.005,40 EUR incl. VAT

Further information for Softing WX_AD_COAX2,228017 coax test adapter 1 pair

General
Frequency range1 - 2500 MHz
Impedance75 Ohm
InterfaceF-type
Number1 pair
Compliance with standardsTIA 570B, 568C.4
The coaxial cable test adapter from Softing IT Networks, type WX_AD_COAX2,228017, is a specialised adapter for testing coaxial cables in the field of network infrastructure. It serves as an interface between a network or cable tester and a coaxial cable, enabling analysis of its electrical properties in the frequency range of 1 to 2500 MHz. The adapter is designed for use in professional installations, particularly in environments complying with standards TIA 570B and 568C.4, as applied in building cabling and transmission technology.

Coaxial cable testing
The adapter enables precise measurement of coaxial cables, typically used for transmitting television and data signals. The 75 Ohm impedance is the standard value for coaxial cables in video technology and certain network environments, making this value critical for correct signal transmission. The F-type interface is the common connection method for coaxial cables in home and business cabling, ensuring a mechanically stable and electrically reliable connection.

Frequency range and compliance with standards
The frequency range of 1 to 2500 MHz covers the requirements for modern transmission systems, including digital television transmission and high-frequency data communication. Compliance with standards TIA 570B and 568C.4 ensures that the adapter can be used for testing installations that meet these internationally recognised standards. These standards define, among other things, requirements for cabling in buildings, particularly regarding signal integrity and cable system performance.

The test adapters are supplied as a pair, meaning two units are required to perform a complete test of a coaxial cable—one at each end of the cable. This enables measurement of parameters such as attenuation, reflection, and impedance matching over the entire length of the cable.

Practical application
The adapter is typically connected to a network or cable tester, which captures and evaluates the measurement values. It is particularly suitable for technicians in the field of building cabling, installation of SAT and cable TV systems, and IT infrastructure in enterprises. The use of specific adapters like this ensures that measurement results are reliable and comparable, which is essential for quality assurance and network maintenance.

Technical design
The F-type sockets are designed for a secure mechanical connection and allow easy mounting at the cable ends. The 75 Ohm impedance ensures no signal reflections occur, which could impair measurement accuracy. The 2500 MHz frequency limit is sufficient for most applications in coaxial cabling, including modern digital transmission systems.

Compatibility and accessories
The adapter is specifically developed for use with devices from the WireXpert series by Softing IT Networks; however, other testers can also be used, provided they support the required interfaces and measurement functions for coaxial cables. Using it with other devices requires checking compatibility, as not all testers support the same interfaces or measurement methods.

Mounting and installation
Mounting is done by simply attaching the F-type sockets to the ends of the coaxial cable to be tested. Connection to the tester is made via the device’s corresponding connectors. No additional tools or mounting aids are required. Testing can be performed directly at the installation site without removing or cutting the cable.

Operational benefits
Using this adapter enables quick and reliable testing of coaxial cables, allowing early detection of faults such as attenuation, impedance deviations, or mechanical damage. This reduces maintenance time and increases the reliability of installed systems. Compliance with standards ensures that results are comparable with other tests, which is important for documentation and certification of cabling installations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1165930
qrcode für Softing WX_AD_COAX2,228017 coax test adapter 1 pair