| General |
| Connector 2 | RJ45-bus |
| Application | Measurements on E2E and Profinet links |
| Components | 1 x 228153, 1 x 228162 |
This product is a single test cable from Softing IT Networks, type WX_AC_TERA_RJ45F_PCORD1, specifically designed for use in network measurements in industrial environments. It connects a TERA plug to an RJ45 socket and has a length of 2 metres. The cable is used for performing measurements on E2E and Profinet links that use RJ45 connectors. It is part of the WireXpert system and is used as accessory for network testers to check the quality and functionality of Ethernet connections in industrial applications.
Applications
This test cable is primarily intended for use in industrial networks, particularly in environments where E2E (Ethernet for Control and Automation) or Profinet protocols are used. These protocols are widely used in automation technology, where reliable and error-free data transmission over Ethernet connections is critical. The cable enables testing of connections realised via RJ45 connectors, thus supporting the diagnosis of network faults, cable breaks, or impedance anomalies.
Functions and Equipment in Detail
The cable consists of two components: a TERA plug (article number 228153) and an RJ45 socket (article number 228162). The TERA plug is a special connector that connects to measurement devices such as the WireXpert, while the RJ45 socket connects to the network link under test. This combination allows analysis of the electrical properties of the connection without requiring additional adapters or conversions. The 2-metre length provides sufficient reach for connecting the measurement device to the test point without compromising measurement accuracy.
Technology Explained Simply
The cable serves as a bridge between a network tester and an RJ45 connection in the installation. The TERA plug is a specific connector developed for communication with Softing network testers. The RJ45 socket enables direct connection to industrial Ethernet links. Using such a cable is necessary to measure electrical parameters such as impedance, attenuation, or reflections in the cable. These parameters are critical for the functionality of E2E and Profinet networks, as deviations can lead to data loss or communication failures.
Compatibility and Accessories
The test cable is specifically developed for use with devices from the WireXpert system by Softing IT Networks. It is compatible with E2E and Profinet networks that use RJ45 connectors. As an accessory, it is part of a comprehensive network analysis system that also includes other cable types, adapters, and measurement devices.
Installation and Mounting
Installation is performed by simply plugging the TERA plug into the corresponding port on the network tester and the RJ45 socket into the network link under test. No additional tools or mounting aids are required. The connection is mechanically stable and allows for safe measurement without mechanically stressing the connectors. The cable connection is designed for industrial use and can be operated under normal operating conditions.
Operational Advantages
The cable enables fast and precise diagnosis of network faults in industrial environments. The direct connection between the measurement device and the RJ45 link reduces error sources that could arise from additional adapters or conversions. The 2-metre length provides sufficient flexibility for testing in various configurations without affecting measurement accuracy. Its use in E2E and Profinet networks supports the maintenance and servicing of industrial automation systems.