| General |
| Connector 1 | TERA |
| Connector 2 | M12 D-coded socket |
| Application | Measurements on E2E and Profinet links |
| Compatibility | Softing WireXpert tester |
The product is a single test cable from Softing IT Networks, type WX_AC_TERA_M12DF_PCORD1, specifically designed for diagnosing and analysing industrial network connections. It connects a TERA plug to an M12 D-coded socket and has a length of 2 metres. The cable is used for performing measurements on E2E and Profinet network segments equipped with M12 D-coded connectors. This connector type is widely used in industrial automation, particularly in environments requiring high mechanical robustness and protection against dust and moisture.
Applications
This test cable is intended for use in industrial networks, particularly in systems based on E2E (Ethernet over EtherCAT) or Profinet. These protocols are commonly used in factory automation, where reliable, deterministic data transmission is required. The use of M12 D-coded connectors ensures a unique connection, preventing incorrect mating and increasing connection reliability. Therefore, the cable is especially suitable for maintenance, servicing, and fault diagnosis in production environments, where network failures can lead to downtime.
Functions and Equipment in Detail
The cable features a TERA plug at one end, specifically developed for connection with Softing WireXpert network testers. This plug enables secure and reliable data transmission between the tester and the network segment under test. At the other end, there is an M12 D-coded socket, which can be connected to an M12 D-coded plug. The D-coding ensures that only compatible plugs can be inserted, preventing incorrect connections. The 2-metre length provides sufficient flexibility during measurements without impairing signal quality.
Technology Explained Simply
The cable is designed as a single cable, meaning it is not part of a complex cable harness or multi-connection system, but functions as an individual, independent cable. The use of M12 connectors is common in industrial electronics due to their high mechanical stability and protection rating. The D-coding is a specific connector keying system that ensures only plugs with the same coding can be connected. This is particularly important in complex installations where different connector types are used to avoid incorrect connections.
Compatibility and Accessories
The cable is specifically designed for use with Softing WireXpert network testers. The TERA interface is a proprietary interface from Softing, used for communication between the tester and the test cable. The M12 D-coded socket is compatible with all industrial devices using M12 D-coded plugs, especially in E2E and Profinet networks. No additional accessories are required to use the cable, as it is designed as a standalone test cable.
Installation and Mounting
Installation is performed by simply plugging the TERA plug into the corresponding port on the WireXpert tester and connecting the M12 D-coded plug to the network segment under test. No additional tools or mounting aids are required. The connection is mechanically stable and can be securely maintained even under operating conditions in industrial environments.
Operational Advantages
The cable enables fast and precise diagnosis of network faults in E2E and Profinet systems. The use of M12 D-coded connectors ensures a secure and error-free connection, increasing the reliability of the measurement. The 2-metre length provides sufficient flexibility for positioning the tester and the test point without affecting signal quality. The TERA interface ensures reliable data transmission between tester and cable, supporting the accuracy of measurement results.