Softing IT Networks WX_AC_EF_MM_REFCORD_LCLC, EAN: 0046382254242

Softing WX_AC_EF_MM_REFCORD_LCLC test cable LC simplex 2m black strain relief

Measurement > Network Analyzers

Softing WX_AC_EF_MM_REFCORD_LCLC test cable LC simplex 2m black strain relief

Lieske Part No. 1929143
Mfg Part No WX_AC_EF_MM_REFCORD_LCLC
EAN-Code 0046382254242
Manufacturer Softing IT Networks
Here only 88,16 EUR
104,91 EUR incl. VAT

Further information for Softing WX_AC_EF_MM_REFCORD_LCLC test cable LC simplex 2m black strain relief

General
Cable typeMulti mode
Connector typeLC/PC
Number of connectors2
Cable configurationSimplex
Bend protectionBlack
UtilizationReference test cable
Order typeorder-based
Mode transparencyYes
This product is a multimode test cable from Softing IT Networks, type WX_AC_EF_MM_REFCORD_LCLC, specifically designed for use in network and data communication applications. It is a simplex reference test cable with LC/PC connectors at both ends, featuring a length of 2 meters. The cable serves as a standard connection in optical measurement technology, particularly for calibrating and validating network test devices, ensuring consistent and reproducible measurement results. The use of LC connectors enables precise and secure connections in modern network infrastructures, especially in environments requiring high signal quality and low reflections.

Multimode test cables are designed for transmitting light signals over fiber optic cables, where the multimode principle transmits multiple light modes simultaneously. This makes them particularly suitable for short to medium distances in local area networks (LAN), server room connections, or during the commissioning of network components. The cable is designed as a reference test cable, meaning it serves as a known, calibrated standard to detect and quantify measurement deviations in other cables or devices.

LC/PC connectors are standardized fiber optic connectors that offer high mechanical stability and low optical reflections. The designation PC (Physical Contact) indicates a polished connector surface, enabling direct, contact-free connection between the fibers. The use of LC connectors is widespread in modern network infrastructure due to their compact size, ease of handling, and suitability for high data rates.

The cable is equipped with a black strain relief boot, which reduces mechanical stress on the cable at the connectors, thereby extending its service life and enhancing connection reliability. This strain relief protects the sensitive fiber and connector interface from bending and torsional stress, which can occur during frequent plugging and unplugging.

The length of 2 meters is suitable for typical test and calibration environments in server rooms, data centers, or during the commissioning of network components. It provides sufficient reach without using unnecessarily long cables that could cause confusion or mechanical stress.

The cable is mode-transparent, meaning it can be used regardless of the modulation technique or specific network protocol in use. This is particularly important in environments where various devices and systems are interconnected and universal compatibility is required.

The use as a reference test cable requires high quality and reproducibility of optical properties. Therefore, the cable is typically used in conjunction with network test devices such as the WireXpert system from Softing to evaluate the performance of fiber cables, patch panels, or other network components. It serves as a basis for determining losses, reflections, and other optical parameters.

The simplex configuration means the cable contains only one fiber, transmitting data in one direction. This is typical for applications where data transmission is unidirectional, for example, when measuring individual cables or calibrating test devices where only one direction is measured.

The cable is order-specific and non-cancellable, meaning it cannot be returned or cancelled after ordering. This is typical for specialized test cables, which are often produced to order and are not available in standard stock.

Compatibility and accessories include use with other Softing network test devices, particularly the WireXpert system. It is intended as a replacement or reference cable for calibrating and validating measurement results. Use with other devices is possible, provided they support LC/PC connectors and have compatible optical specifications.

Installation and mounting are performed by simply connecting the LC connectors to the corresponding ports. No special tools or additional components are required. The cable is intended for use in enclosed spaces such as server rooms or data centers, with mechanical stability ensured by the strain relief boot.

In operation, the cable provides high reliability and reproducible measurement results, which is particularly important for quickly and accurately identifying faults in network infrastructures. The use of a standardized reference cable reduces measurement error sources and enables objective evaluation of fiber cable performance and other components.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1929143
qrcode für Softing WX_AC_EF_MM_REFCORD_LCLC test cable LC simplex 2m black strain relief