| General |
| Module type | SFP |
| Fibre type | Single mode |
| Operation mode | Bi-directional |
| Connection | LC |
| Transmission range | 20 km |
| Transmission wavelength | 1310 nm |
| Receiving wavelength | 1490 nm |
| Function | Digital Diagnostics |
The SFP module from Softing IT Networks is a singlemode transceiver designed for use in networks requiring high reach. It functions as an optical network adapter, connecting to network devices such as switches or routers via an LC connector. The module enables bidirectional data transmission over fiber optic cables, with transmission directions realized using different wavelengths: 1310 nm for transmit (TX) and 1490 nm for receive (RX). This technique is referred to as Bi-directional and allows the use of a single fiber optic cable for bidirectional data traffic, simplifying cable installation and reducing the number of cables required.
SFP-Module is a standard format for small form-factor transceivers, widely used in many network devices. It is compatible with devices supporting the SFP standard and enables flexible expansion of network infrastructures. The module is designed for a maximum reach of 20 km, making it suitable for applications in large enterprise networks, between sites, or in telecommunications installations. The use of singlemode fiber optic cable ensures high bandwidth and low signal loss over long distances.
Bi-directional means that data is transmitted in both directions over a single fiber optic cable. This is achieved by using different wavelengths for transmission and reception. The wavelength 1310 nm is used for transmission from the transmitter (TX), while 1490 nm is designated for reception from the receiver (RX). This technique reduces the number of cables required and simplifies installation, especially in environments where cable routing is limited.
Digital Diagnostics is an integrated function that enables real-time monitoring of the module's operating status. Parameters include temperature, voltage, optical power (transmit power and receive power), and laser operation. These diagnostic data can be queried via the network device to monitor operation and detect potential issues early. The function supports maintenance and fault diagnosis in complex networks.
LC connector is the standard interface for SFP modules. It provides a secure and precise connection to the fiber optic cable and is widely used in modern networks. The LC connector is compact and offers high mechanical stability, making it suitable for use in switches, routers, and other network devices.
The module is designed for use in fiber optic networks requiring high reach and bandwidth. It is particularly suitable for applications in enterprise networks where sites are connected over long distances, or in telecommunications infrastructures. The combination of singlemode technology, bi-directionality, and Digital Diagnostics ensures a reliable and maintenance-friendly network connection.
The use of
singlemode fiber optic cable enables high data rates over long distances, as light waves are guided in a single mode, minimizing signal distortion. This is especially important for transmissions over 20 km, where low attenuation and high signal quality are critical. The module is therefore designed for applications requiring high reliability and long-term stability.
Digital Diagnostics supports network administration through continuous monitoring of module parameters. The data can be queried via management systems to optimize operation and predict failures. This is particularly useful in large networks, where rapid fault localization is essential.
The module is delivered without additional components. It is intended as a replacement part or expansion for existing networks and requires no special tools for installation. Installation is performed by simply inserting the module into the SFP slot of the network device, with the mechanical fit of the LC connector ensuring a secure connection.