| General |
| Module type | SFP |
| Fibre type | Single mode |
| Connection | LC |
| Transmission range | 20 km |
| Diagnostics | Digital Diagnostics |
| Transmit wavelength | 1490 nm |
| RX wavelength | 1310 nm |
The SFP module from Softing IT Networks is a singlemode transceiver designed for use in Ethernet networks, particularly in environments requiring stable data transmission over long distances. The module is designed for bidirectional data transmission and features an LC connector, optimized for connection with singlemode fiber cables. With a range of up to 20 km, it is suitable for applications in large enterprise networks, telecommunications infrastructures, or industrial networks where high bandwidth and reliability over long distances are required. The module technology enables data transmission in both directions over a single fiber cable, reducing the number of cables needed.
SFP module is the standard for small form factor transceivers used in switches, routers, and other network devices. This module is specifically designed for singlemode fibers, which are suitable for long distances due to their low attenuation and high bandwidth. Bidirectional transmission occurs at wavelengths of 1490 nm (transmit frequency, TX) and 1310 nm (receive frequency, RX), allowing signals to be transmitted in both directions over a single fiber cable without interference. This technology is commonly used in FTTX applications and telecommunications.
Digital Diagnostics is an integrated function that enables real-time monitoring of the module's operating status. This includes measurements such as temperature, voltage, optical power (transmit power and receive power), and laser bias currents. These data can be queried via the network device to detect deviations or failures early. The diagnostic function supports maintenance and troubleshooting in complex networks by enabling precise analysis of module conditions.
LC connector is the standard fiber optic connector used in modern networks. It features a compact design and provides a secure, precise connection. The LC plug is inserted directly into the SFP module, ensuring a stable optical coupling. The use of LC connectors is widespread in switches, routers, and fiber optic systems, ensuring compatibility with existing infrastructures.
The
range of 20 km makes the module suitable for applications requiring connections over several kilometers, such as between corporate sites, in industrial automation, or in public infrastructure. The maximum range is achieved under ideal conditions, including appropriate fiber quality and correct installation. The use of singlemode fibers enables high data rates with minimal signal distortion over the entire distance.
The module is designed for use in network devices that support SFP slots. It is used in switches, routers, and other devices requiring optical connections via fiber cables. Installation is performed by simply inserting the module into the appropriate slot, with the fiber cable connection established via the LC connector. Configuration is done through the network device, and diagnostic functions can be accessed via the management interface.
The
wavelengths 1490 nm (TX) and 1310 nm (RX) are optimized for bidirectional transmission over a single fiber cable. The different wavelengths prevent interference between transmitted and received signals, allowing both directions to be transmitted simultaneously over the same cable. This technique reduces the number of fiber cables required and simplifies network architecture.
The module is designed for use in professional networks and meets requirements for reliability, performance, and maintainability. The integrated diagnostic function supports network administration in monitoring and troubleshooting. The use of singlemode fibers and the LC connector ensures high compatibility with existing infrastructures. The 20 km range makes it suitable for applications requiring stable connections over long distances.