Softing IT Networks PS_CP15,226007, EAN: 0046382253528

Softing PS_CP15,226007 Cable Tracker Probe CP15

Measurement > Network Analyzers

Softing PS_CP15,226007 Cable Tracker Probe CP15

Lieske Part No. 1783585
Mfg Part No PS_CP15,226007
EAN-Code 0046382253528
Manufacturer Softing IT Networks
Here only 69,82 EUR
83,09 EUR incl. VAT

Further information for Softing PS_CP15,226007 Cable Tracker Probe CP15

General
Product typeTone/tracing receiver
ManufacturerSofting IT Networks
Model designationCable Probe (CP15)
CompatibilityAnalog tone generators, LAN tester with integrated tone generator
Operation modeHandheld receiver
The Cable Probe (CP15) from Softing IT Networks is a tone/tracing receiver designed specifically for use with analog tone generators or LAN testers equipped with an integrated tone generator. It is used for precise tracing of cables and lines in complex network infrastructures, particularly in electrical and IT installations. The receiver detects signals sent by a tone generator and visualizes them through acoustic feedback, enabling the exact position of a cable within the cabling system to be determined. Typical applications include installation, maintenance, or troubleshooting in networks where visual or electrical identification of lines is insufficient.

Applications

The Cable Probe (CP115) is primarily used in network infrastructure environments where precise cable localization is required. This includes installation of structured cabling systems, maintenance of LAN networks, and troubleshooting of broken or incorrectly routed lines. It is especially useful in environments with dense cabling, such as server rooms, distribution cabinets, or during cable installation in walls, ceilings, or floor slabs. The device is typically used in combination with a tone generator, which sends an acoustic signal through the cable, detected by the receiver.

Functions and Equipment in Detail

The receiver is designed to receive analog tone frequencies generated by an external tone generator. It features an acoustic indicator that reproduces the received signal as sound — the stronger the signal, the louder the tone. This enables intuitive tracing, as the user moves the device along the cable route and adjusts for maximum tone volume, indicating the exact cable position. The device is compact and designed for mobile use, with operation controlled via a simple switch.

Technology Explained Simply

The Cable Probe (CP15) operates on the principle of inductive signal transmission. A tone generator produces an electrical signal that is transmitted through the cable to be traced. This signal generates a magnetic field around the cable, which the receiver can detect. Detection is performed via a sensitive antenna in the receiver, which converts the magnetic field back into an electrical signal. This signal is then converted into an audible tone, played through an integrated speaker. The tone’s volume correlates with proximity to the cable, enabling precise tracing. The technology is independent of the cable’s electrical conductivity, as long as it acts as a conductor for the tone signal.

The receiver does not include an integrated tone generator; it is designed exclusively as a receiver. Therefore, use always requires a separate tone generator to produce the signal. It is assumed that the receiver is battery-operated, as no external power supply is mentioned.

Compatibility and Accessories

The Cable Probe (CP15) is compatible with any analog tone generator or any LAN tester equipped with an integrated tone generator. Use is not restricted to specific manufacturers or models, as long as the device generates an analog tone signal within the receiver’s frequency range. The description focuses solely on its function as a tracing receiver without additional features.

Mounting and Installation

Mounting or installation of the Cable Probe (CP15) requires no special measures. The device is simply held near the cable to be traced, with the antenna aligned as parallel to the cable as possible to maximize signal strength. Operation is controlled by a simple switch that activates reception. The device is used exclusively as a handheld tool.

Advantages in Operation

The Cable Probe (CP15) provides a reliable and simple method for tracing cables, especially in complex or non-visible cabling situations. The acoustic feedback enables intuitive operation, even for technicians without specialized training in signal technology. Compatibility with any tone generator increases flexibility, allowing the device to be used with existing equipment. Handling is straightforward and requires no additional tools or accessories.

Batteries are not included in the delivery scope.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1783585
qrcode für Softing PS_CP15,226007 Cable Tracker Probe CP15