Softing IT Networks NX2_AC_MM_LCLC_Cord1,400980, EAN: 0046382254280

Softing NX2_AC_MM_LCLC_Cord1,400980 test cable multimode LC-LC duplex

Measurement > Network Analyzers

Softing NX2_AC_MM_LCLC_Cord1,400980 test cable multimode LC-LC duplex

Lieske Part No. 2063582
Mfg Part No NX2_AC_MM_LCLC_Cord1,400980
EAN-Code 0046382254280
Manufacturer Softing IT Networks
Here only 31,15 EUR
37,07 EUR incl. VAT

Further information for Softing NX2_AC_MM_LCLC_Cord1,400980 test cable multimode LC-LC duplex

General
Cable typeMulti mode
Plug connectionLC LC Duplex
Accessory forNetXpert XG / XG2
Number1 piece
This product is a test cable from Softing IT Networks, type NX2_AC_MM_LCLC_Cord1, specifically designed as accessory for the NetXpert XG and NetXpert XG2 devices. It is a multimode network cable with LC-LC duplex connectors, used for performing network cable tests in the field of measurement technology. The cable is order-specific and non-cancellable, indicating a custom-made item or limited stock. It is not intended for use as a test cable with the WireXpert series, due to technical incompatibility or specific application optimization for the NetXpert product line.

Applications
This test cable is used for connecting and testing multimode fibre cables during network cable tests. It is primarily used in the context of NetXpert XG and XG2 devices, which are employed for diagnosing and analysing network infrastructures in enterprises, buildings, or data centres. The application typically occurs during installation, maintenance, or troubleshooting of fibre optic cables, especially in environments using multimode technology, such as local area networks (LAN) or building cabling.

Functions and Equipment in Detail
The cable features two LC connectors configured as a duplex connection, meaning two fibres are integrated into one cable – one for transmission and one for reception. The use of LC connectors is common in modern networking technology due to their compact design and high mechanical stability. Multimode technology enables light signal transmission through multiple light waveguides, suitable for short to medium distances, as commonly found in local networks. The cable is designed as a test cable, meaning it is used to connect test equipment to cable segments or other test points to verify the performance and integrity of the cabling.

Technology Explained Simply
The term multimode refers to the type of light transmission in the fibre optic cable. Unlike singlemode cables, which use only one light path, multimode cables transmit multiple light waves simultaneously, enabling higher bandwidth over shorter distances. LC connectors are small, square connectors commonly used in modern networks, especially in switches, routers, and other network devices. The duplex format means two independent fibres are integrated into the cable, enabling bidirectional communication. The cable is not intended for use with the WireXpert series, indicating it meets specific requirements for connectors or signal transmission incompatible with WireXpert technology.

Compatibility and Accessories
The test cable is exclusively designed for Softing IT Networks' NetXpert XG and NetXpert XG2 devices. It serves as an accessory to support the measurement functions of these devices when testing multimode fibre cables. Use with other devices, particularly the WireXpert series, is not intended and may result in malfunction or inaccurate measurement results.

Installation and Mounting
Installation is performed by simply inserting the LC connectors into the corresponding ports on the test devices or the cables to be tested. No additional tools or mounting aids are required. The cable is designed as a standard test cable and therefore does not require special mounting instructions. It is used within the normal operating procedures of NetXpert devices, with the devices themselves controlling necessary settings and measurement sequences.

Operational Advantages
The test cable enables precise and reliable testing of multimode fibre cables in conjunction with NetXpert XG and XG2 devices. The use of LC connectors ensures a secure and stable connection, while the duplex configuration supports bidirectional communication. The specific design for the NetXpert series ensures accurate and consistent measurement results without requiring additional adjustments or adapters. The exclusion of use with the WireXpert series prevents potential compatibility issues and ensures clear separation of application areas.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2063582
qrcode für Softing NX2_AC_MM_LCLC_Cord1,400980 test cable multimode LC-LC duplex