Softing IT Networks NX_XG2_Plus_Trade_In,226835, EAN: 0046382254389

Softing NX_XG2_Plus_Trade_In network tester trade-in

Measurement > Network Analyzers

Softing NX_XG2_Plus_Trade_In network tester trade-in

Lieske Part No. 1929139
Mfg Part No NX_XG2_Plus_Trade_In,226835
EAN-Code 0046382254389
Manufacturer Softing IT Networks
Here only 4.261,90 EUR
5.071,66 EUR incl. VAT

Further information for Softing NX_XG2_Plus_Trade_In network tester trade-in

General
Maximum data transfer rate10 Gbit/s
Supported technologiesCopper, Fibre optic, WLAN
Copper measurement methodsWiring diagram, BERT, SNR, Delay Skew
Fibre optic testBERT according to IEEE 802.3
Plug end surface ratingOptional with fibre optic microscope
Supported protocolsCDP, LLDP, IPv4, IPv6
PoE supportup to 90 W
DocumentationPDF report generation
Battery type6-cell high power battery
Accessories included in kit2 x XG handheld device, 1 x end device, patch cable, power supplies, USB adapter, couplings, hard-shell case, 4 x upgrade license, manual
SFP module compatibilitySofting part no. 400982, 400984, 400985, 400986
Down paymentAgainst certifier with SNR, delay skew or BERT function
Cable length determinationYes
The NetXpert XG2 Plus from Softing IT Networks is a professional network qualifier for testing copper and fiber optic cabling up to a transmission rate of 10 Gbit/s. The device is used for installation, commissioning, and troubleshooting in networks and combines active and passive test methods. It is designed for use in IT infrastructure, by network installers, and in industrial environments where high reliability and precise diagnosis are required.

Applications

The NetXpert XG2 Plus is used for qualifying network cables in copper and fiber optic technology. It is suitable for testing cabling in office buildings, data centers, industrial facilities, and for maintaining existing networks. The functions include checking for IEEE compliance, fault detection, cable length determination, and signal quality analysis. The integrated support for WLAN tests extends the application range to wireless networks.

Functions and Equipment in Detail

The device performs tests on copper cabling, combining four measurement methods: wiring map, Bit Error Rate Test (BERT), Signal-to-Noise Ratio (SNR), and length and delay skew differences. These methods ensure high reliability of the results. The display of the wiring map, cable lengths, and distance to breaks or short circuits enables precise fault localization. For fiber optic cabling, error-free transmission up to 10 Gbit/s is verified via a BERT test according to IEEE 802.3 standard. The LiveLight™ function shows fiber attenuation in real time and enables cable length determination. An automated evaluation of connector end faces is possible with an optional fiber optic microscope according to IEC 61300-3-35 standard.

Technology Explained Simply

The NetXpert XG2 Plus supports active network tests on copper, fiber optic, and WLAN. This includes connection status, DHCP test, Network-Discovery, PoE support up to 90 W, ping list, traceroute, VLAN detection, and detection of CDP and LLDP protocols. Support for IPv4 and IPv6 enables testing of modern networks. PDF report generation directly on the device simplifies documentation and handover to customers or clients. The devices are equipped with a 6-cell high-power battery, enabling mobile use.

Compatibility and Accessories

Specific SFP modules are required for fiber optic functions: Softing part numbers 400982, 400984, 400985, 400986. These modules support multimode and singlemode connections with different ranges and wavelengths. Suitable accessories include SFP modules for 1G and 10G Fiber Channel, as well as an Installer Kit containing patch cables, power supplies, USB adapters, and a hard-shell case. Combining with a fiber optic microscope enables evaluation of connector end faces.

Installation and Mounting

Installation is performed using the included patch cables and end devices. The devices are compact and designed for mobile use. Operation is via the integrated display, with results shown and documented directly on the device. The devices are designed for use in cabling networks executed according to IEEE and IEC standards.

Operational Advantages

The NetXpert XG2 Plus offers comprehensive network diagnostic functions, enabling fast fault detection and localization. The combination of passive and active tests increases the reliability of results. Integrated documentation in the form of PDF reports reduces administrative effort. Support for PoE up to 90 W and WLAN tests extends the application range. Mobile use enabled by the high-power battery and robust packaging in a hard-shell case make the device suitable for on-site use.

The offer includes a trade-in of an existing qualifier with SNR, Delay Skew, or BERT function against a new NetXpert XG2 Plus at a reduced price. The old cable tester must be returned to Softing within 30 days of purchase; otherwise, the list price will be charged. The price list already shows the reduced price.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1929139
qrcode für Softing NX_XG2_Plus_Trade_In network tester trade-in