Softing IT Networks NX_XG2_25_5G,226739, EAN: 0046382254266

Softing NX_XG2_25_5G network tester up to 2.5 and 5 Gbit/s

Measurement > Network Analyzers

Softing NX_XG2_25_5G network tester up to 2.5 and 5 Gbit/s

Lieske Part No. 539479
Mfg Part No NX_XG2_25_5G,226739
EAN-Code 0046382254266
Manufacturer Softing IT Networks
Here only 2.787,68 EUR
3.317,34 EUR incl. VAT

Further information for Softing NX_XG2_25_5G network tester up to 2.5 and 5 Gbit/s

General
Type of deviceNetwork and cabling qualifier
Supported data transfer ratesup to 2.5 and 5 Gbit/s
Cabling typeCopper and optionally fibre optic
FunctionsWiring diagram display, cable length measurement, distance measurement to break/short circuit, PoE test, link detection, ping, DHCP, LLDP detection, IEEE compliance test, BERT, SNR, delay skew, PDF report generation
Scope of delivery1 x XG handheld device for copper and fibre, 1 x remote unit (copper only), 2 x RJ45 Cat 6A patch cables, 1 x USB adapter, 2 x power supplies, 1 x hard-shell case, manual, 1 x upgrade license, 1 x 4-cell battery
SFP modulesOrder separately
The NetXpert XG2 from Softing IT Networks is a professional network and cabling qualifier designed for testing copper and optional fiber optic cabling. The device enables qualification of networks at transmission rates up to 2.5 and 5 GBit/s and is designed for use in industrial and commercial environments. It serves for precise analysis of cabling structures, including display of the wiring diagram, measurement of cable length, and determination of distance to breaks or short circuits. The integrated functionality allows performance of active network tests, such as detection of PoE (Power over Ethernet), link detection, ping tests, and DHCP connection tests. Additionally, the device can identify network components via LLDP (Link Layer Discovery Protocol), making network analysis more efficient.

Applications

The NetXpert XG2 is designed for specialists in the field of network infrastructure, such as installers, network technicians, and IT professionals. It is used for installation, maintenance, and troubleshooting in structured cabling systems, particularly in environments with high requirements for bandwidth and reliability. Testing for IEEE compliance at transmission rates up to 5 GBit/s makes the device especially suitable for modern networks operating with Cat 6A or higher cable categories. The ability to measure BERT tests (Bit Error Rate Test), SNR (Signal-to-Noise Ratio), and Delay Skew enables comprehensive evaluation of signal quality and cabling performance.

Functions and Equipment in Detail

The device offers comprehensive diagnostic functions for copper and LWL cabling. Display of the wiring diagram aids in visual inspection of cabling, while measurement of cable length and distance to faults supports precise localization of disturbances. Active network tests, such as PoE, link detection, ping, and DHCP, enable real-time verification of network component functionality. LLDP detection supports identification of devices in the network, which is helpful for network management and documentation. The integrated PDF report generation on the device allows direct creation of test reports, which can be used for documentation purposes or handed over to customers.

Technology Explained Simply

IEEE compliance testing is performed by measuring BERT, SNR, and Delay Skew. BERT captures the bit error rate to evaluate signal integrity. SNR measures the ratio of useful signal to noise, describing the quality of transmission. Delay Skew refers to the time shift between individual conductors in a cable, which can be critical at high transmission rates. These measurements are essential to ensure cabling performance at high data rates. Support for PoE enables testing whether network components can be powered via the network cable, which is relevant for installing IP cameras or access points.

Compatibility and Accessories

It is compatible with RJ45 connectors and supports Cat 6A cabling. Suitable accessories include the Softing LinkXpert accessories for installers, the Softing CableMaster accessories: Industrial accessories kit, the Softing Cable Tracker Probe CP15, the Softing CableMaster/Netxpert accessories: Remote Identifier Set RJ45 (1-24), and the NetXpert zbh installer accessories kit. These accessories support installation and testing in complex networks.

Mounting and Installation

The device is used as a handheld unit and requires no special mounting. Installation is performed by connecting to the cabling to be tested. The kit includes an XG handheld unit for copper and LWL, an end unit/remote unit (copper only), two RJ45 Cat 6A patch cables, a USB adapter, two power supplies, a hard-shell case, a manual, an upgrade license, and a 4-cell battery. The devices are immediately ready for use once the necessary connections are made.

Advantages in Operation

The NetXpert XG2 offers comprehensive diagnostic functions, making cabling system testing efficient and reliable. The integrated PDF report generation reduces documentation effort. The ability to perform active network tests enables quick fault diagnosis. Support for high transmission rates up to 5 GBit/s makes the device suitable for modern networks. The combination of copper and LWL support expands the application range. Delivery with a hard-shell case ensures protection of the device during transport and field use.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/539479
qrcode für Softing NX_XG2_25_5G network tester up to 2.5 and 5 Gbit/s