Softing IT Networks NX_XG2_1G,226737, EAN: 0046382253993

Softing NX_XG2_1G,226737 network tester 1 GBit/s

Measurement > Network Analyzers

Softing NX_XG2_1G,226737 network tester 1 GBit/s

Lieske Part No. 539491
Mfg Part No NX_XG2_1G,226737
EAN-Code 0046382253993
Manufacturer Softing IT Networks
Here only 2.354,00 EUR
2.801,26 EUR incl. VAT

Further information for Softing NX_XG2_1G,226737 network tester 1 GBit/s

General
Type of deviceNetwork and cabling qualifier
Supported mediaCopper and optionally fibre optic
Maximum data transfer rate1 Gbit/s
FunctionsWiring diagram display, cable length measurement, distance measurement to interruption/short circuit, PoE test, link detection, ping, DHCP, LLDP detection, BERT, SNR, delay skew, PDF report generation
Scope of delivery1 x XG Handgerät für Kupfer und LWL, 1 x Endgerät/Remote Unit (nur Kupfer), 2 x RJ45 Cat 6A Patchkabel, USB-Adapter, 2 x Netzteile, Hartschalen-Koffer, Handbuch, 1 x 4 Zellen Batterie
SFP modulesTo be ordered separately
The NetXpert XG2 1GBits/s from Softing IT Networks is a professional network and cabling qualifier designed for testing copper and optional fibre optic cabling. The device serves quality control during the installation and maintenance of network infrastructures and enables precise analysis of wiring diagrams, cable lengths, and distances to breaks or short circuits. It is designed for use in industrial and commercial environments where high reliability and accurate diagnostic functions are required.

Applications

The device also supports detection of network components via LLDP (Link Layer Discovery Protocol), enabling identification of switches, routers, and other devices in the network. The integrated PDF report generation allows documentation of test results directly on the device, which is important for traceability and archiving of installations.

Functions and Equipment in Detail

The device performs a variety of active network tests, including PoE (Power over Ethernet), link detection, ping tests, and DHCP queries. These functions enable verification of network device functionality and reachability. IEEE compliance testing is carried out using BERT (Bit Error Rate Test), SNR (Signal-to-Noise Ratio), and Delay Skew, ensuring signal transmission quality and cabling integrity. The display of the wiring diagram aids in visual inspection of cabling, while cable length measurement and distance to faults (e.g. breaks or short circuits) enable precise localisation of disruptions.

Technology Explained Simply

The NetXpert XG2 1GBits/s operates using a combination of passive and active testing methods. Passive analysis includes measurement of electrical parameters such as impedance, attenuation, and Delay Skew, while active tests verify network functionality. The BERT function measures error rates during data transmission, which is particularly relevant at high transmission rates. SNR measurement evaluates the ratio of signal to noise, which is crucial for connection stability. The integrated PDF report function generates structured documents containing test results, suitable for internal or external reporting.

Compatibility and Accessories

The device is designed for use with copper cables (Cat 6A) and optional fibre optic lines. Compatible accessories include the Remote Identifier Set RJ45 (1-24), the Industrial Accessories Kit, the LinkXpert Accessories for Installer, the Cable Tracker Probe CP15, and the NetXpert zbh Installer Accessories Kit. These accessories support functional expansion, such as cable identification in complex installations or installation in industrial environments.

Mounting and Installation

The NetXpert XG2 1GBits/s Kit delivery includes the XG handheld device for copper and fibre, an end device/remote unit (copper only), two RJ45 Cat 6A patch cables, a USB adapter, two power supplies, a hard-shell case, a manual, and a 4-cell battery. Installation is performed by connecting cables to the appropriate ports on the device and the remote unit. Operation is via the integrated user interface of the handheld device. The battery enables mobile use without external power supply. The remote unit is connected at the other end of the cable under test to verify the connection.

Advantages in Operation

The NetXpert XG2 1GBits/s offers comprehensive diagnostic functions for network cabling, beneficial during both installation and maintenance of networks. The integrated PDF report generation reduces documentation effort, while active network tests directly verify device functionality in the network. The combination of passive and active testing methods enables comprehensive analysis of cabling quality. The inclusion of Cat 6A patch cables ensures compatibility with modern network standards. Mobile use, enabled by the integrated battery and robust packaging in a hard-shell case, makes the device suitable for use outside office environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/539491
qrcode für Softing NX_XG2_1G,226737 network tester 1 GBit/s