Softing IT Networks NX_XG2_10G_TRADE_IN,226836, EAN: 0046382254334

Softing NX_XG2_10G_TRADE_IN network tester trade-in

Measurement > Network Analyzers

Softing NX_XG2_10G_TRADE_IN network tester trade-in

Lieske Part No. 1929136
Mfg Part No NX_XG2_10G_TRADE_IN,226836
EAN-Code 0046382254334
Manufacturer Softing IT Networks
Here only 2.618,00 EUR
3.115,42 EUR incl. VAT

Further information for Softing NX_XG2_10G_TRADE_IN network tester trade-in

General
Maximum data transfer rate10 Gbit/s
Measurement methodsWiring diagram, BERT, SNR, Delay Skew
Active network testsConnection status, DHCP test, Network discovery, PoE, Ping list, Traceroute, VLAN detection, IPv4/IPv6, CDP/LLDP detection
Report generationPDF report on device
Scope of delivery1 x XG2 handheld device, 1 x end device/remote unit (copper only), 2 x RJ45 Cat 6A patch cables, USB adapter, 2 x power supplies, hard-shell case, manual, 1 x 4-cell battery
PoE supportup to 90 W
Down payment offerAgainst certifier with SNR, delay skew or BERT function
Return period30 Days
The NetXpert XG2 10G from Softing IT Networks is a professional network and cabling qualifier designed for testing copper cabling up to 10 Gbit/s. The device is suitable for installation, commissioning, and troubleshooting in networks and combines four measurement methods – wiring map, Bit Error Rate Test (BERT), Signal-to-Noise Ratio (SNR), and length and delay skew differences – to achieve reliable results. The combination of these methods enables a comprehensive analysis of cabling quality and supports compliance with IEEE standards. The device displays the wiring map, cable length, and distance to breaks or shorts.

Applications

The NetXpert XG2 10G is used in IT infrastructure and electrical trades where precise qualification of network cables is required. It is suitable for testing copper cabling in office buildings, industrial facilities, data centres, and other environments where high data transfer rates and reliability are required. The integrated functions for active network tests also support diagnosing network issues during operation.

Functions and Equipment in Detail

The device performs active network tests on copper, fibre optic, and WLAN. These include connection status, DHCP test, network discovery, PoE testing (up to 90 W), ping list, traceroute, VLAN detection, and support for IPv4 and IPv6. It also detects CDP and LLDP protocols, simplifying network analysis. PDF report generation directly on the device enables quick documentation of test results. The delivery includes a handheld unit for copper and active LWL, an end device/remote unit (copper only), two RJ45 Cat 6A patch cables, a USB adapter, two power supplies, a hard-shell case, a manual, and a 4-cell battery.

Technology Explained Simply

The four integrated measurement methods – BERT, SNR, Delay Skew, and wiring map – enable detailed analysis of cabling. BERT (Bit Error Rate Test) checks the error-free transmission of data, SNR (Signal-to-Noise Ratio) evaluates signal quality relative to noise, Delay Skew measures timing differences between individual conductors to detect distortions. The wiring map shows the correct arrangement of conductors in the cable. This combination ensures a comprehensive evaluation of cabling compliance.

Compatibility and Accessories

The device is designed for copper cabling up to 10 Gbit/s. Compatible accessories include the Softing LinkXpert Accessory Kit for Installers (INSTALL_ACC_KIT) and the Softing CableMaster Accessory: Industrial Accessory Kit. These sets contain additional tools and adapters that extend the capabilities of the NetXpert XG2 10G.

Mounting and Installation

Installation is performed by directly connecting the device to the cabling to be tested. The handheld unit is connected at one end of the cable, and the end device/remote unit at the other end. The integrated tests are started via the user interface. Results are displayed directly on the device and can be saved as a PDF file. The delivery includes all necessary cables and adapters for basic functions.

Operational Advantages

The NetXpert XG2 10G offers high test accuracy through the combination of multiple measurement methods. The integrated PDF report generation simplifies documentation and reporting. Support for PoE up to 90 W and detection of CDP/LLDP protocols extend functionality for modern networks. The device is designed for use in professional environments and provides comprehensive diagnostic functions for copper cabling.

Trade-in Offer

The device is available as part of a trade-in offer. To qualify, an existing qualifier with SNR, Delay Skew, or BERT functionality must be returned to Softing. The price in the shop is already reduced. The return of the old device must be completed within 30 days of purchase; otherwise, the list price will be charged. The offer is order-specific and non-cancellable.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1929136
qrcode für Softing NX_XG2_10G_TRADE_IN network tester trade-in