Softing IT Networks NX_XG2_10G,226736, EAN: 0046382254006

Softing NX_XG2_10G network tester 10 GBit/s

Measurement > Network Analyzers

Softing NX_XG2_10G network tester 10 GBit/s

Lieske Part No. 539476
Mfg Part No NX_XG2_10G,226736
EAN-Code 0046382254006
Manufacturer Softing IT Networks
Here only 2.730,64 EUR
3.249,46 EUR incl. VAT

Further information for Softing NX_XG2_10G network tester 10 GBit/s

General
Supported cablingCopper and optionally fibre optic (LWL)
Maximum data transfer rate10 Gbit/s
Test methodsBERT, SNR, Delay Skew
Network testsPoE, Link detection, Ping, DHCP
Component detectionLLDP
Report generationPDF
Scope of delivery1 x XG handheld device, 1 x end device/remote unit, 2 x RJ45 Cat 6A patch cables, 1 x USB adapter, 2 x power supplies, 1 x hard-shell case, manual, 2 x upgrade license, 1 x 4-cell battery
The NetXpert XG2 10GBits/s from Softing IT Networks is a professional network and cabling qualifier designed for testing and analysing copper and optional fibre optic cabling. The device is used for quality inspection of network infrastructures, particularly in environments requiring high transmission rates up to 10 Gbit/s. It enables precise diagnosis of cabling faults, identification of network components, and execution of active network tests to ensure functionality and compliance of the installation.

Applications

The NetXpert XG2 is used in the installation, maintenance, and troubleshooting of networks, particularly in industrial, corporate, and data centre environments. It is suitable for qualifying cabling according to IEEE standards, with testing for compliance at transmission rates up to 10 Gbit/s. Applications range from cabling verification in new installation projects to diagnosing faults in existing networks. The integrated PDF report generation enables documented evaluation of tests, which may be required for quality management and compliance.

Functions and Equipment in Detail

The device offers comprehensive diagnostic functions, including display of the wiring diagram, measurement of cable lengths, and determination of distance to breaks or short circuits. These functions support rapid localisation of faults in cabling. Additionally, the device performs active network tests, including PoE (Power over Ethernet) detection, link detection, ping tests, and DHCP connection tests. Network component identification is achieved via LLDP (Link Layer Discovery Protocol), enabling identification of switches, routers, and other devices in the network.

Technology Explained Simply

IEEE compliance testing is performed using BERT (Bit Error Rate Test), SNR (Signal-to-Noise Ratio), and Delay Skew to evaluate the quality of transmission signals. These measurement methods are essential to ensure that the cabling meets required technical specifications, especially at high data rates. The integrated PDF report generation allows results to be saved and printed directly on the device, facilitating documentation and traceability of tests. The device equipment includes an XG handheld unit suitable for both copper and fibre optic cabling, as well as an end unit/remote unit used exclusively for copper cabling.

Compatibility and Accessories

The device is compatible with various accessory components that extend its functionality. These include the Softing Cable Tracker Probe CP15, the Remote Identifier Set RJ45 (1-24), and various accessory kits such as the LinkXpert Installer Accessory Kit or the CableMaster Industrial Accessory Kit. These components support installation and testing in complex network environments.

Mounting and Installation

Installation is carried out using the included RJ45 Cat 6A patch cables, intended for connecting the device to the cabling under test. The device is powered via a power supply unit or an integrated 4-cell battery, enabling flexible use even in mobile applications. The delivery includes a USB adapter, two power supply units, a hard-shell case for transport and protection, and an operating manual. The two upgrade licences enable activation of additional functions beyond the basic configuration.

Advantages in Operation

The NetXpert XG2 offers comprehensive diagnostic functions that test both physical cabling and network functionality. The integrated PDF report generation reduces documentation effort and enables quick evaluation. The combination of copper and optional fibre optic functionality, along with support for PoE testing, makes the device a versatile tool for network technicians. Mobile use is supported by the integrated battery and robust packaging in a hard-shell case, enabling operation in various working environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/539476
qrcode für Softing NX_XG2_10G network tester 10 GBit/s