Softing IT Networks NX_AC_SFP_1G_MM,400984, EAN: 0046382253283

Softing NX_AC_SFP_1G_MM SFP module multimode 1G Fiber Channel

Measurement > Network Analyzers

Softing NX_AC_SFP_1G_MM SFP module multimode 1G Fiber Channel

Lieske Part No. 1787964
Mfg Part No NX_AC_SFP_1G_MM,400984
EAN-Code 0046382253283
Manufacturer Softing IT Networks
Here only 54,75 EUR
65,15 EUR incl. VAT

Further information for Softing NX_AC_SFP_1G_MM SFP module multimode 1G Fiber Channel

General
Transmission rate2,125 Gbit/s
Wavelength850 nm
Transmission range500 m
ConnectionDuplex LC
Fibre typeMulti mode
Compatibility1000BASE-SX, 2G Fiber Channel (2GFC)
Operation modeBi-directional
The SFP module NX_AC_SFP_1G_MM from Softing IT Networks is a network transceiver for use in high-speed networks. It serves as an optical interface for multimode fiber cables and enables data transmission in duplex mode via an LC connector. The module is designed for operation in 1000BASE-SX networks as well as in 2G Fiber Channel (2GFC) systems, with a maximum reach of 500 meters. The transmission rate is 2.125 Gbit/s, with the wavelength of the light signal being 850 nm. Compatibility with 1000BASE-SX and 2GFC makes the module suitable for various applications in networking, particularly in environments where multimode fiber cables are used.

Applications

The module is designed for use in local area networks (LAN) and Fibre Channel systems where high data rates and short transmission distances are required. It is commonly used in switches, routers, or servers that feature SFP slots. The use of multimode fiber cables makes it especially suitable for internal networks in buildings or data centers, where the 500-meter reach is sufficient. The bidirectionality of the module allows simultaneous data transmission in both directions over a single fiber pair.

Functions and Features in Detail

The module features a duplex LC connector designed for connection to multimode fiber cables. The transmission rate of 2.125 Gbit/s meets the requirements for 1000BASE-SX and 2G Fiber Channel, with 2GFC support enabling use in storage networks. The wavelength of 850 nm is typical for multimode systems and ensures efficient signal transmission over the specified reach. Bidirectionality reduces the number of fibers required, as data can be transmitted in both directions over a single fiber pair.

Technology Explained Simply

SFP modules (Small Form-factor Pluggable) are small, hot-swappable transceivers used in network devices such as switches or routers to establish optical connections. The NX_AC_SFP_1G_MM module uses multimode fiber, in which multiple light waves are transmitted simultaneously through the fiber. This allows for higher bandwidth, although it is limited to shorter distances. The 850 nm wavelength is standard for multimode systems and offers a good balance between reach and signal quality. The 2.125 Gbit/s transmission rate is sufficient for 1000BASE-SX networks, which support a maximum rate of 1 Gbit/s, while the 2.125 Gbit/s rate is necessary for 2GFC support.

Compatibility and Accessories

The module is compatible with devices that support SFP slots for multimode transceivers. It can be used in systems supporting 1000BASE-SX or 2G Fiber Channel. As suitable accessories, the switch module ALL4750 SFP (Mini-GBIC), 1000 Mbit, SX/LC, Multimode is offered, which is also designed for multimode fiber cables. Combining it with appropriate fiber cables and network devices enables a stable and high-performance connection.

Installation and Mounting

Installation is performed by inserting the module into an SFP slot of a network device. Connection to the fiber cable is made via the duplex LC connector. Bidirectionality requires no additional configuration, as data transmission occurs automatically in both directions. Mounting is simple and tool-free, as SFP modules are hot-swappable.

Operational Advantages

The module provides a reliable and high-performance connection for multimode fiber cables. Support for 1000BASE-SX and 2G Fiber Channel expands its range of applications. Bidirectionality reduces the number of fibers needed, simplifying installation and reducing costs. The maximum reach of 500 meters is sufficient for many internal network applications, while the 2.125 Gbit/s transmission rate meets the requirements of modern networks.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1787964
qrcode für Softing NX_AC_SFP_1G_MM SFP module multimode 1G Fiber Channel