Softing IT Networks FX_AC_HQ_MM_LC,400977, EAN: 0046382253177

Softing FX_AC_HQ_MM_LC launch/receive fiber multimode LC 150m

Measurement > Network Analyzers

Softing FX_AC_HQ_MM_LC launch/receive fiber multimode LC 150m

Lieske Part No. 1783648
Mfg Part No FX_AC_HQ_MM_LC,400977
EAN-Code 0046382253177
Manufacturer Softing IT Networks
Here only 329,35 EUR
391,93 EUR incl. VAT

Further information for Softing FX_AC_HQ_MM_LC launch/receive fiber multimode LC 150m

General
Fibre typeMulti mode -
Fibre type classificationOM3 -
ConnectorLC/SC -
Constructionspecial metal sheathing -
Application typeForward and return fibre -
Product lineHeavy Duty Line -
The lead-in and tail fiber from Softing IT Networks is a multimode fiber cable with a length of 150 meters, specifically designed for use in network test environments. It serves as a connecting element between the network tester and the cable system to be tested, transmitting signals without affecting measurement accuracy. The fiber is equipped with an LC connector at one end and an SC connector at the other, enabling flexible adaptation to different test environments. The special metal jacketing ensures an extremely durable and robust construction, referred to as Heavy Duty Line. This design protects the fiber from mechanical stresses, such as pressure, bending, or tensile forces, which may occur during the installation or maintenance of network infrastructures.

Lead-in and tail fiber are used in measurement technology to stabilize and calibrate the measurement results of network testers. They serve as reference cables that simulate signal propagation and attenuation in the cable system, enabling precise evaluation of performance. The fiber is designed for use in multimode networks, with the OM3 classification indicating high bandwidth and short transmission distances. This classification is particularly suitable for high-speed applications such as 10 Gigabit Ethernet.

Multimode fiber enables the transmission of light signals over multiple light waves, achieving higher data rates compared to singlemode fibers. The OM3 fiber is specifically optimized for use with lasers in the wavelength range of 850 nm, ensuring efficient signal transmission and low attenuation. The use of LC and SC connectors allows compatible connection to common network devices and test equipment. The special metal jacketing increases mechanical stability and extends the fiber's lifespan, especially in environments with high mechanical stress.

Heavy Duty Line describes the fiber's construction, designed for demanding operating conditions. The metal jacketing protects the sensitive glass fiber cable from external influences such as mechanical stress, moisture, or temperature fluctuations. This makes the fiber particularly suitable for use in industrial environments, during installation in cable ducts, or for frequent transport and reuse. The length of 150 meters allows flexible adaptation to different test configurations and enables bridging larger distances between test device and cable system.

The fiber is designed for use in networks employing multimode technology, particularly in environments requiring high data rates and short transmission distances. The combination of LC and SC connectors offers broad compatibility with various network devices and test systems. The special metal jacketing provides increased mechanical strength, making the fiber especially suitable for demanding environments. The fiber is ordered on request, meaning it is not standard stock but produced after order placement.

Compatibility is a central aspect of the fiber, as it can be used with common network testers and devices. The use of LC and SC connectors ensures adaptation to various connection types, increasing flexibility in use. The OM3 classification enables use in high-speed applications, particularly in 10 Gigabit Ethernet networks. The fiber is not intended for use in singlemode networks, as the wavelengths and transmission characteristics do not match.

The fiber is designed for use in industrial and professional environments where high mechanical loads and frequent maintenance work occur. The robust construction enables long service life and reduces replacement needs. The length of 150 meters provides sufficient flexibility for connecting to various test points and allows flexible installation. The fiber is not supplied as a standard item but is available on request, meaning delivery occurs after order placement.

Technical features such as length, fiber classification (OM3), and connector type (LC/SC) are crucial for functionality. The length of 150 meters allows flexible adaptation to different test configurations. The OM3 classification ensures high bandwidth and is suitable for high-speed applications. The use of LC and SC connectors ensures broad compatibility with various devices. The special metal jacketing increases mechanical stability and extends the fiber's lifespan.

The fiber is not intended for use in singlemode networks, as the transmission characteristics and wavelengths do not match. Use in multimode networks is optimal, especially in environments requiring high data rates and short transmission distances. The fiber is suitable for use in industrial environments where mechanical loads and frequent maintenance work occur. The robust construction enables long service life and reduces replacement needs.

Operational advantages include high mechanical stability, long service life, and broad compatibility. The special metal jacketing protects the fiber from mechanical stress and extends its service life. The length of 150 meters allows flexible adaptation to various test configurations. The use of LC and SC connectors ensures broad compatibility with various devices. The fiber is suitable for use in high-speed networks, particularly in 10 Gigabit Ethernet applications.

The fiber is available on request, meaning it is produced after order placement. It is specifically designed for use in network test environments and serves as a lead-in and tail fiber for calibration and stabilization of measurement results. The robust construction and special metal jacketing make the fiber particularly suitable for demanding operating conditions.

The fiber is designed as a standalone product and is not combined with additional components. It is used in conjunction with network testers, serving as a reference cable. The fiber is not intended for use in singlemode networks, as the transmission characteristics do not match. Use in multimode networks is optimal, especially in environments requiring high data rates and short transmission distances.

The fiber is designed for use in industrial and professional environments where high mechanical loads and frequent maintenance work occur. The robust construction enables long service life and reduces replacement needs. The length of 150 meters provides sufficient flexibility for connecting to various test points and allows flexible installation. The fiber is not supplied as a standard item but is available on request, meaning delivery occurs after order placement.

Installation and mounting are typically performed by skilled personnel familiar with handling fiber optic cables. The fiber is equipped with LC and SC connectors, enabling easy connection to corresponding ports. The special metal jacketing protects the fiber during installation and prevents damage from mechanical stress. The fiber is suitable for use in cable ducts, shafts, or other structured environments. Installation typically requires no additional tools, as the connectors are standardized and allow easy connection.

The fiber is not intended for use in singlemode networks, as the transmission characteristics and wavelengths do not match. Use in multimode networks is optimal, especially in environments requiring high data rates and short transmission distances. The fiber is suitable for use in industrial environments where mechanical loads and frequent maintenance work occur. The robust construction enables long service life and reduces replacement needs.

Functions and equipment in detail include a length of 150 meters, OM3 fiber classification, use of LC and SC connectors, and special metal jacketing. The length allows flexible adaptation to different test configurations. The OM3 classification ensures high bandwidth and is suitable for high-speed applications. The use of LC and SC connectors ensures broad compatibility with various devices. The special metal jacketing increases mechanical stability and extends the fiber's lifespan.

The fiber is not intended for use in singlemode networks, as the transmission characteristics and wavelengths do not match. Use in multimode networks is optimal, especially in environments requiring high data rates and short transmission distances. The fiber is suitable for use in industrial environments where mechanical loads and frequent maintenance work occur. The robust construction enables long service life and reduces replacement needs.

Applications include calibration and stabilization of network testers, particularly in multimode networks. The fiber serves as a reference cable to simulate signal propagation and attenuation in the cable system. The special metal jacketing makes the fiber particularly suitable for use in industrial environments where high mechanical loads and frequent maintenance work occur. The length of 150 meters allows flexible adaptation to different test configurations. The fiber is suitable for use in high-speed networks, particularly in 10 Gigabit Ethernet applications.

The fiber is available on request, meaning it is produced after order placement. It is specifically designed for use in network test environments and serves as a lead-in and tail fiber for calibration and stabilization of measurement results. The robust construction and special metal jacketing make the fiber particularly suitable for demanding operating conditions.

Technology explained simply refers to the operation of multimode fiber, which transmits multiple light waves simultaneously, achieving higher data rates. The OM3 classification is optimized for high-speed applications, particularly for 10 Gigabit Ethernet. The LC and SC connectors enable flexible connection to various devices. The special metal jacketing protects the fiber from mechanical stress and extends its lifespan.

The fiber is not intended for use in singlemode networks, as the transmission characteristics and wavelengths do not match. Use in multimode networks is optimal, especially in environments requiring high data rates and short transmission distances. The fiber is suitable for use in industrial environments where mechanical loads and frequent maintenance work occur. The robust construction enables long service life and reduces replacement needs.

Operational advantages include high mechanical stability, long service life, and broad compatibility. The special metal jacketing protects the fiber from mechanical stress and extends its service life. The length of 150 meters allows flexible adaptation to various test configurations. The use of LC and SC connectors ensures broad compatibility with various devices. The fiber is suitable for use in high-speed networks, particularly in 10 Gigabit Ethernet applications.

The fiber is available on request, meaning it is produced after order placement. It is specifically designed for use in network test environments and serves as a lead-in and tail fiber for calibration and stabilization of measurement results. The robust construction and special metal jacketing make the fiber particularly suitable for demanding operating conditions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1783648
qrcode für Softing FX_AC_HQ_MM_LC launch/receive fiber multimode LC 150m