The bundle cable cutter 1.6 to 6.0 mm (Fiber Tube Scorer) from Miller is a specialised tool for the precise processing of fibre optic bundles in the field of network infrastructure. The manufacturer is Softing IT Networks, and the device is offered under the type designation FTS-Miller. It is used for clean and controlled cutting of fibre optic bundles with a diameter between 1.6 mm and 6.0 mm, where the cutting technology is adapted to the specific requirements of Fiber Tube systems. The tool is typically used during the installation, maintenance or repair of fibre optic cables, particularly in telecommunications and industrial network environments.

Applications

The bundle cable cutter is designed for use with fibre optic cables installed in protective sleeves (Fiber Tubes). These cable types are commonly found in structured cabling systems, during cable installation in ducts, or in building and industrial installations. This is essential to maintain the optical quality and signal integrity of the fibre optic cable. The application is primarily in the field of network infrastructure, where precise and reproducible cable processing is required.

Functions and Equipment in Detail

The tool is specifically designed for use with fibre optic bundles having a diameter of 1.6 mm to 6.0 mm. Operation is manual, with the user initiating the cutting process by applying pressure to the tool. The precision of the cutting edge is crucial to achieve a clean cut surface suitable for subsequent processing steps such as polishing or inserting into a fibre connector. The tool is designed for use in craft and installation practice, with a robust construction ensuring long service life and reliable performance.

Technology Explained Simply

The bundle cable cutter operates on the principle of precision cutting. The cutting edge is activated by mechanical pressure, cleanly severing the protective sleeve of the fibre optic bundle. The cutting technology is designed to avoid damaging the sensitive glass fibre cores, which is critical for cable functionality. The cut surface is shaped to be suitable for subsequent processing steps such as polishing or inserting into a fibre connector. The tool design enables safe and controlled handling, with cutting force manually controlled by the user. The tool operates without additional accessories or power supply, making it mobile and location-independent.

Compatibility and Accessories

The tool is specifically designed for fibre optic bundles with a diameter of 1.6 mm to 6.0 mm. It is intended for use with Fiber Tube systems employed in structured cabling systems. Compatibility is limited to these specific cable types, with the cutting technology adapted to the materials and dimensions of these bundles. The tool is used without additional tools or accessories.

Mounting and Installation

Mounting of the bundle cable cutter does not refer to installation in the conventional sense, but rather to handling. The tool is operated manually, with the user inserting the fibre optic bundle into the tool and activating the cutting edge by applying pressure. Handling requires no special mounting or installation, and is performed directly at the worksite. Operation is simple and does not require special training, with the precision of the cutting edge determining the quality of the result. The tool design enables safe and controlled handling.

Advantages in Operation

Using the bundle cable cutter provides the advantage of clean and precise cutting of fibre optic bundles, preserving the optical quality of the fibres. The cutting technology prevents damage to the glass fibre cores, which is critical for signal integrity. Manual operation enables flexible and mobile use, with the tool functioning without additional power supply or accessories. The robust construction ensures long service life and reliable performance, minimising maintenance and replacement. The application is simple and does not require special training, thereby increasing efficiency in the workflow.