| General |
| Signal generator | CT10 |
| Probe receiver | CT15 |
| Cable types | RJ-45, RJ-11, RJ-12 |
| RJ-45 connection cable | 8 inch |
| Transport case | CC-2 |
The Softing IT Networks CTK1015 is a network tone and probe set, specifically developed for identifying and tracing network cables in complex cabling systems. The set includes a signal generator (CT10), a sensitive probe receiver unit (CT15), a pair of crocodile clips, an 8-inch RJ-45 connection cable, an operating manual, and a transport case (CC-2). It is used for precise localization of cables in walls, cable ducts, or at patch panels, where the signal generator is connected to one end of the cable and transmits a coded signal that can be received and localized using the probe receiver unit.
Applications
The CTK1015 set is designed for use in IT infrastructures where fast and reliable identification of network cables is required. Typical application scenarios include maintenance of data centers, network installation in office buildings, or localization of cables in existing cabling systems. The combination of signal generator and probe receiver enables cable tracing even in enclosed spaces or behind wall coverings, significantly speeding up the search for the correct connection point on a patch panel or switch.
Functions and Equipment in Detail
The signal generator CT10 generates a coded signal transmitted over the connected network cable. The probe receiver unit CT15 is highly sensitive and can detect the signal even in proximity to other cables, enabling precise localization. The crocodile clips allow flexible connection to various cable types, including RJ-45, RJ-11, and RJ-12, extending the application to different network and telephone cables. The included RJ-45 connection cable (8 inches) serves as a direct connection between the signal generator and the cable connection point.
Technology Explained Simply
The technology is based on transmitting an electromagnetic signal over the cable, which is received by the probe receiver unit. The signal is transmitted directly over the cable conductors, not over the network, so it can be detected even when the network is inactive. The receiver unit displays signal strength, enabling precise cable positioning. The function to activate the port LED on switches or hubs by blinking supports connection assignment by visually highlighting the port connected to the cable.
Compatibility and Accessories
The CTK1015 set is compatible with network cables featuring RJ-45, RJ-11, or RJ-12 connectors. The crocodile clips allow connection to exposed conductors, extending application to various cable types. The set is designed for use with Ethernet hubs, switches, and routers, with the port LED function simplifying connection assignment. No additional accessories are required to use the basic functions.
class=text-center" style="font-size: 14px;>
Installation and Mounting
Installation is performed by connecting the signal generator CT10 to the cable to be identified, using either the crocodile clips or the RJ-45 connection cable. The probe receiver unit CT15 is held in the area of the suspected cable route to receive the signal. Positioning is achieved via the signal strength indicator. The port LED function is activated by configuring the signal generator accordingly, causing the connected port on the switch or hub to blink.
Operational Advantages
The CTK1015 set significantly reduces the time required for cable identification in complex networks. The combination of signal tracing and port LED activation enables fast and reliable assignment of cables to connections. The use of crocodile clips and RJ-45 connection cables increases application flexibility. The included operating manual and transport case (CC-2) ensure structured handling and protection of the devices during storage and transport.