| General |
| Light sources multimode | 850 nm, 1300 nm |
| Light sources singlemode | 1310 nm, 1550 nm |
| Broadband power meter | 700 nm - 1700 nm |
| Red light sources | 1.25 mm, 2.5 mm |
| Adapter | 3x LC, 3x SC |
| Encircled flux | Complies with IEC 14763-3 |
| Compatibility | WireXpert MP Mainframe |
The Softing WireXpert MP Fibre Optic Measurement Module Quad (type WX-Modul-FQ, manufacturer's number 230506) is a specialised measurement module for fibre optic networks, designed for use in combination with a WireXpert MP Mainframe. It is used for precise analysis and quality testing of fibre optic cables across various wavelength ranges. The module is designed for use in network infrastructure, particularly for installation, maintenance, and troubleshooting of fibre optic cables. It enables measurement of optical power, attenuation, and connection quality across multiple wavelengths, with multimode light sources complying with current standards.
Applications
This module is used in professional network operations, particularly for the installation and maintenance of fibre optic cables in data centres, building cabling, and industrial networks. It is suitable for testing both multimode and singlemode fibre optic links, with measurements performed at various wavelengths (850 nm, 1300 nm, 1310 nm, 1550 nm). The integrated broadband power measurement in the range of 700 nm to 1700 nm allows comprehensive analysis of optical properties. The red light sources with 1.25 mm and 2.5 mm diameters support visual fault location in cables.
Functions and Equipment in Detail
The module features a multimode light source with wavelengths of 850 nm and 1300 nm, as well as a singlemode light source with 1310 nm and 1550 nm. The multimode light sources comply with the Encircled Flux definition according to IEC 14763-3, ensuring standardised and reproducible light distribution. The integrated broadband power measurement covers the range from 700 nm to 1700 nm and enables optical power measurement across a broad spectral range. Additionally, two red light sources with 1.25 mm and 2.5 mm diameters are integrated, serving for visual localisation of cables and connections.
Technology Explained Simply
The light sources in the module generate monochromatic light at defined wavelengths, which is transmitted through the fibre optic cable. The received power is measured by the integrated power meter, allowing determination of attenuation and connection quality. The Encircled Flux definition ensures consistent light distribution in the cable, which is essential for reproducible measurement results. The broadband measurement allows analysis of optical properties across a broad spectral range, which is helpful for diagnosing cable faults. The red light sources enable visual inspection of cable connections, especially in complex cabling setups.
Compatibility and Accessories
The module is specifically designed for use with the WireXpert MP Mainframe. It is not operable independently and requires integration into the Mainframe system. The delivery includes three LC adapters and three SC adapters, intended for the connection options of the light sources and the power meter. These adapters enable connection to various fibre optic connectors.
Mounting and Installation
The module is inserted into the WireXpert MP Mainframe, with physical mounting achieved by inserting it into the corresponding module socket. The electrical and optical connections are automatically established once the module is seated in the Mainframe. Operation is performed via the Mainframe’s software, which controls the measurement functions. The adapters are directly attached to the module and allow direct connection to the cables under test.
Advantages in Operation
The combination of multiple wavelengths, broadband measurement, and red light sources provides comprehensive diagnostic capabilities for fibre optic links. Compliance with the Encircled Flux definition ensures standard conformity and comparability of measurement results. The integrated adapters facilitate quick adaptation to different connectors. The module is designed for professional users requiring precise and standardised measurements. It is not intended for use without the Mainframe, making integration into the existing system essential.