Softing IT Networks 230502, EAN: 0046382255188

Softing 230502 fiber cable certifier multimode

Measurement > Network Analyzers

Softing 230502 fiber cable certifier multimode

Lieske Part No. 1246130
Mfg Part No 230502
EAN-Code 0046382255188
Manufacturer Softing IT Networks
Here only 7.689,60 EUR
9.150,62 EUR incl. VAT

Further information for Softing 230502 fiber cable certifier multimode

General
Product typeLAN fibre optic cable certifier
ManufacturerSofting IT Networks
Cable typeMulti mode
Wavelength850 nm, 1300 nm
Broadband measurement range700 nm to 1700 nm
Ferrule size1,25 mm, 2,5 mm
TechnologyDual Control System PLUS - DCS+TM
Light source typeMulti mode
NormIEC 14763-3
Battery typeLi-ion
Number of mainframes2
Number of measurement modules2
Number of batteries2
Number of power supplies2
AdapterLC, SC
Headsets2
SoftwareeXport (Download)
AccessoriesCarry bag, calibration certificate, quick start guide
Scope of delivery2x Mainframe, 2x measurement module, 2x battery, 2x power supply, carrying bag, calibration certificate, eXport software, LC- and SC-adapters, 2x headset, quick start guide
Test leadnot included
Encircled flux complianceYes
The WireXpert MP FM from Softing IT Networks is a LAN fibre optic cable certifier for multimode applications. The device is used for precise testing and certification of fibre optic cables in local area networks (LAN) and enables measurement of optical parameters such as attenuation, power, and cable integrity. It is specifically designed for validating multimode fibres used in data transmission systems with high bandwidths and short transmission distances. The system consists of two WireXpert MP mainframes connected via a Dual Control System PLUS (DCS+TM) to enable bidirectional measurement. Each mainframe is equipped with a fibre optic measurement module FM, which integrates a light source at 850 nm and 1300 nm, as well as a broadband power meter covering the range from 700 nm to 1700 nm. The multimode light source complies with the Encircled Flux definition according to IEC 14763-3, ensuring measurement accuracy aligned with industry standards and providing reproducible, standardised measurements.

Applications

The WireXpert MP FM is used in the installation, maintenance, and certification of fibre optic networks, particularly in environments where multimode fibres are employed, such as office buildings, data centres, or industrial networks. Certification is performed in accordance with international standards to confirm the performance and reliability of cable connections. The device is suitable for professional users requiring documented cable quality testing, for example, during the acceptance of network infrastructures or during maintenance of existing systems.

Functions and Equipment in Detail

The system includes two WireXpert MP mainframes, each equipped with a fibre optic measurement module FM. The measurement modules contain light sources at 850 nm and 1300 nm, used for standard measurements in multimode networks. The integrated broadband power meter covers the range from 700 nm to 1700 nm, enabling analysis of non-standard wavelengths as well. Two integrated red light sources with ferrules in sizes 1.25 mm and 2.5 mm allow visual fibre identification without additional adapters. The delivery includes two Li-ion batteries, two power supplies, a carrying bag, a calibration certificate, the evaluation software eXport (available for download), LC and SC adapters for light source and power meter, two headset units, and a quick start guide. The user interface guides the operator through the fibre testing process.

Technology Explained Simply

Encircled Flux compliance (EF) ensures that the light distribution in the fibre conforms to standards, which is necessary for consistent and comparable measurements. The broadband measurement function allows capturing power data across a wide spectral range, which is helpful for diagnosing faults or analysing non-standard systems. The integrated red light sources with different ferrule sizes enable direct activation of fibres with various connectors without requiring additional adapters. The Dual Control System PLUS technology enables bidirectional measurement, allowing precise determination of the total cable attenuation.

Compatibility and Accessories

The system is equipped with interchangeable adapters for common connector interfaces such as LC, SC, and FC. Additional optional adapters are available, including switching adapters with SC/PC and LC/PC interfaces for TX and RX ports, as well as singlemode test cables in various configurations (SC-LC/APC, LC/APC-LC/APC) and reference couplers. A singlemode test cable kit with duplex connection (2 m) is also available. For use with the WireXpert MP, accessories such as a headset, camera cover, and hard-shell case are available. Combining the system with the Cable Tracker Probe CP15 enables cable location within the network.

Installation and Mounting

Installation is performed by connecting the two mainframes via the Dual Control System PLUS. The measurement modules are inserted into the mainframes, and adapters are connected according to the connector type. Measurement is initiated via the user interface, with the software capturing and evaluating the measurement values. The carrying bag facilitates device transport. The power supplies and batteries provide flexible power options, with batteries suitable for mobile applications.

Operational Advantages

The integrated EF compliance ensures high measurement accuracy in line with industry standards. Bidirectional measurement via the Dual Control System PLUS reduces error sources and increases result reliability. The integrated red light sources with various ferrule sizes reduce the need for additional adapters. The evaluation software eXport enables documentation and analysis of measurement results. The delivery of two mainframes and two measurement modules allows simultaneous testing of two cables or bidirectional measurements, increasing operational efficiency. The system is designed for professional users requiring standardised, documented certification of fibre optic cables.

The set does not include test cables. Additional adapters are available optionally.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1246130
qrcode für Softing 230502 fiber cable certifier multimode