The CAT5E reference socket RJ45 from Softing IT Networks serves as a standard reference component for the calibration and validation of network test devices, particularly in connection with CAT65E MPTL systems and patch cord test adapters. It is specifically designed for use in network technology to ensure the accuracy of measurements and tests on cable connections. The socket enables precise verification of impedance, signal integrity, and contact quality in Ethernet installations. As a reference component, it is used in practice for calibrating test devices to ensure that the devices correctly represent the required standards for network cables and connections.

Reference socket is the central element here, functioning as a known, calibrated measurement standard. The socket is designed for use with CAT5E cables, enabling data transmission rates of up to 1000 MBit/s (Gigabit Ethernet). The RJ45 connector is the standard interface for Ethernet networks and is used worldwide in LAN infrastructures. The socket is specifically designed for use with CAT65E MPTL systems, which ensure high performance and reliability in data transmission within professional networks.

The socket is used as a test adapter for patch cables to check the quality of the connection. In this context, it serves as a reference point where the electrical properties of a patch cable or connection are measured and compared with the required values. This is particularly important in the installation and maintenance of network infrastructures to detect error sources such as contact problems, impedance disturbances, or incorrect polarity at an early stage.

The socket's compatibility is aligned with the requirements of CAT5E and CAT65E systems. It is not designed for other cable categories such as CAT6A or CAT8, but specifically for the mentioned standards. Its use in the calibration of test devices requires high mechanical and electrical stability, which is ensured by the socket's construction. The socket is available as a single unit (1 piece) and serves as a replacement or calibration component in professional environments.

Installation is typically carried out directly into test devices or as part of a calibration setup. No additional tools or mounting components are required, as the socket is delivered as a ready-to-use module. Use typically occurs in laboratory environments, during network commissioning, or during the maintenance of cable connections in companies and infrastructure projects.

In operation, the socket provides a reliable reference that increases the accuracy of network tests. Using a calibrated reference socket reduces error sources that could arise from differing impedances or contact resistances. This is particularly important for compliance with standards such as ISO/IEC 11801 or TIA/EIA-568, which govern the quality of network cables and connections. The socket thus supports adherence to quality standards in network installation and testing.