Further information for Siemens 3TH4271-5KB4 auxiliary contactor 7NO+1 screw terminal DC24V
General
Degree of protection
weatherproof
Operating voltage
24 V DC
Magnetic system
DC
Contact arrangement
7 S + 1 Ö
Connection system
Screw connection
Integrated protection function
Varistor (voltage-sensitive resistor)
Norm
DIN EN 50011
Approvals
IEC, UL/CSA
Output multiplication
up to 10 auxiliary circuits
Positive mechanical interlock
The Siemens auxiliary contactor type 3TH4271-5KB4 is an industrial-grade switching device for controlling auxiliary current circuits in electrical installations. It serves to multiply output signals, enabling simultaneous switching of multiple control signals, and is specifically designed for use in control current circuits. The device features a DC magnetic system with integrated varistor and is designed for an operating voltage of 24 V DC. The contacts are configured as 7 normally closed (S) and 1 normally open (Ö), with the designation 71E referring to the DIN EN 50011 standard, which governs terminal markings and the reliability of connection technology. The screw terminal variant enables a secure and durable connection of the wiring.
Applications
The auxiliary contactor 3TH4271-5KB4 is intended for use in industrial control systems and automation systems, particularly in installations where simultaneous switching of multiple auxiliary circuits is required. It is commonly used in machine control systems, plant monitoring systems, and safety applications where high contact reliability and weather-resistant design are necessary. The devices are suitable for worldwide use and comply with international certifications such as IEC and UL/CSA.
Functions and Equipment in Detail
The device features forced contact guidance, which is particularly relevant for safety applications. This design ensures that contacts are either fully open or fully closed, which is critical for safety-critical functions. The integrated varistor protection safeguards the magnetic system against overvoltages caused by switching operations or network disturbances. The screw terminal variant provides a robust and reliable connection, designed for industrial use.
Technology Explained Simply
The DC magnetic system is operated by a 24 V DC supply voltage, which is common in many industrial control systems. The integrated varistor protection responds to sudden voltage spikes and diverts them to protect the device. The contact configuration with 7 normally closed and 1 normally open contact allows control of multiple loads or signals from a single control impulse. The DIN EN 50011 standard ensures that terminal markings are uniform and understandable, simplifying maintenance and servicing.
Compatibility and Accessories
The auxiliary contactor is available in various versions with 8 or 10 poles, with the 3TH4 series available in both AC and DC actuation. Accessories such as overvoltage limiters, time delay units, and coupling elements are available and can be used as needed depending on the application scenario. An appropriate overvoltage limiter, for example, is item 3TX74023R, designed for voltages of 24–48 V AC or 24–70 V DC.
Mounting and Installation
Mounting is typically done on standard DIN rails, with the screw terminal variant allowing direct connection of the wiring. The weather-resistant design of the device makes it suitable for use in various environmental conditions, including industrial halls or outdoor areas, provided the environmental conditions meet the specified standards.
Advantages in Operation
The high contact reliability and output multiplication enable efficient control of multiple circuits from a single signal. The integrated varistor protection increases the device’s service life and protects the entire control system from damage due to overvoltages. Compliance with standards and worldwide certification simplify use in international projects and reduce complexity during planning and maintenance.