Schneider Electric ATV12HU22M2X, EAN: 3606480286827

Schneider Electric ATV12HU22M2X frequency converter 2

Industrial Material > Automation > Frequency converter, soft starter

Schneider Electric ATV12HU22M2X frequency converter 2

Lieske Part No. 906251
Mfg Part No ATV12HU22M2X
EAN-Code 3606480286827
Manufacturer Schneider Electric
Here only 412,30 EUR
490,64 EUR incl. VAT

Further information for Schneider Electric ATV12HU22M2X frequency converter 2

Additional features
Number of discrete inputs4
Number of discrete outputs2
Number of analog inputs1
Number of analogue outputs1
Relay output number1
Physical interface2-wire RS 485
Connection type1 RJ45
Output rated current10 A at 4 kHz
Access methodServer Modbus, serial
Output frequency of speed controller0,5…400 Hz
Speed adjustment range1…20
Sampling duration20 ms, tolerance +/- 1 ms for logic input; 10 ms for analog input
Linearity error+/- 0.3 % of maximum value for analogue input
Frequency resolutionAnalogue input: A/D converter, 10 bit; Display unit: 0.1 Hz
Time constant20 ms +/- 1 ms for reference change
Transmission speed9.6 Kbit/s; 19.2 Kbit/s; 38.4 Kbit/s
Transmission frameRTU
Number of addresses1…247
Data format8 bits, configurable to odd, even or no parity
Communication serviceRead holding register (03) 29 words; Write single register (06) 29 words; Write multiple registers (16) 27 words; Read/write multiple registers (23) 4/4 words; Read device identification (43)
Polarisation typeNo impedance
4-quadrant operation possibleFalse
Control profile for asynchronous motorsVoltage/Frequency mode (U/f); Quadratic U/f characteristic; Vector-oriented flux control without sensor
Max. output frequency4 kHz
Temporary overload torque150…170 % of rated motor torque depending on drive power and motor type
Acceleration and deceleration rampsU; S; Linear from 0-999.9 s
Motor slip compensationAdjustable; Factory default
Clock frequency2 - 16 kHz adjustable; 4 - 16 kHz with power derating factor
Rated switching frequency4 kHz
Braking to standstillBy direct current injection
Integrated brake chopperFalse
Mains power24.0 A at 100 V (heavy-duty operation); 20.2 A at 120 V (heavy-duty operation)
Max. input current20,2 A
Max. output voltage240 V
Apparent powerat 240 V (heavy-duty operation)
Network frequency50 - 60 Hz
Relative symmetric net frequency tolerance5 %
Potential line Isc1 kA
With safety function Safely Limited Speed (SLS)False
With safety function Safe brake management (SBC/SBT)False
With safety function Safe Operating Stop (SOS)False
With safety function Safe Position (SP)False
With safety function Safe programmable logicFalse
With safety function Safe Speed Monitor (SSM)False
With safety function Safe Stop 1 (SS1)False
With safety function Safe Stop 2 (SS2)False
With safety function Safe torque off (STO)False
with safety function Safely Limited Position (SLP)False
With safety function Safe Direction (SDI)False
Degree of protectionOvervoltage protection for supply voltage; undervoltage detection for mains voltage; overcurrent between output phases and earth; overtemperature protection; short-circuit protection between motor phases; input phase failure protection, three-phase; thermal motor protection via drive through continuous calculation of I²t
[M] tightening torque1,2 Nm
InsulationElectrical, between power and control section
Quantity per setSet of 1 piece
Width105 mm
Height142 mm
Depth156,2 mm
Product weight1,4 kg
Contractual warranty
Warranty (in months)18
Main features
Product seriesAltivar 12
Product or component typeVariable speed drive
Product-specific applicationSimple machine
Mounting modeMounting in control cabinet
Communications protocolModbus
Supply frequency50/60 Hz +/-5 %
[UH,nom] Rated operating voltage200 - 240 V -15 - +10 %
Rated output current10 A
Motor power (kW)2,2 kW
Motor power (HP)3 hp
EMC filterWithout EMC filter
Degree of protection (IP)IP20
Mounting
Operating altitude> 1,000 - 2,000 m with current reduction 1 % per 100 m; = 1,000 m without power reduction
Operating positionVertical +/- 10 degrees
Product certificationsNOM; CSA; C-Tick; UL; GOST; RCM; KC
TextCE
StandardsUL 508C; UL 618000-5-1; IEC 61800-5-1; IEC 61800-3
Construction typeWith heatsink
Environmental class (during operation)Class 3C3 according to IEC 60721-3-3; Class 3S2 according to IEC 60721-3-3
Maximum acceleration under shock (during operation)150 m/s² at 11 ms
Max. acceleration under vibration load (during operation)10 m/s² at 13 - 200 Hz
Max. deflection under vibration load (during operation)1.5 mm at 2 - 13 Hz
Over voltage categoryClass III
Control loopAdjustable PID controller
Electromagnetic emissionRadiated emissions Environment 1 Class C2 according to IEC 61800-3 2 - 16 kHz shielded motor cable; Conducted emissions with additional EMC filter Environment 1 Class C1 according to IEC 61800-3 4 - 12 kHz shielded motor cable
Vibration resistance1 Gn (f = 13…200 Hz) corresponds to IEC 60068-2-6; 1.5 mm peak to peak (f = 3…13 Hz) - drive not mounted on symmetrical DIN rail - corresponds to IEC 60068-2-6
Shock resistance15 Gn equivalent to IEC 60068-2-27 for 11 ms
Relative humidity5…95 % condensation not permitted, conforms to IEC 60068-2-3; 5…95 % without dripping water, conforms to IEC 60068-2-3
Noise level45 dB
Pollution degree2
Ambient air temperature during transport-25…70 °C
Operating ambient temperature-10…40 °C without performance reduction; 40…60 °C with current derating at 2.2 % per degree
Ambient temperature during storage-25…70 °C
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height18,000 cm
VPE 1 width18,500 cm
VPE 1 length18,500 cm
Packaging weight (Lbs)1,618 kg
VPE 2 typeS06
VPE 2 quantity30
VPE 2 height75,000 cm
VPE 2 width60,000 cm
VPE 2 length80,000 cm
VPE 2 weight62,860 kg
Frequency converter 0.18 - 4 kW. Very compact dimensions. Integrated EMC filter class B (first environment, general availability). Motor control via both the classic U/f characteristic curve and sensorless vector control or pump/fan characteristic curve. Can be configured without voltage, even in the packaging. Protectively coated circuit boards for the most difficult environmental conditions. Plug and drive. A standard application runs without settings. Intuitive operation. Modbus integrated.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/906251
qrcode für Schneider Electric ATV12HU22M2X frequency converter 2