Complementary
Input voltage limits	22...30 V
Maximum power dissipation in W	15 W
Activation threshold	(Uin-1) V and 22 V min
Charging time	25 s
Number of output channels	1
Current consumption	0.6 A on load; 0.1 mA no load;
Output protection type	Against overload, protection technology: > 45 A; Against short-circuits, protection technology: power-supplied mode, automatic reset; Against undervoltage, protection technology: tripping if U < 19 V
Connections - terminals	For input connection: screw type terminals, connection capacity: 2 x 0.5...2 x 10 mm² 20 AWG...8 AWG; For output connection: screw type terminals, connection capacity: 2 x 0.5...2 x 10 mm² 20 AWG...8 AWG; For diagnostic relay: removable screw terminal block, connection capacity: 1 x 2.5 mm² 14 AWG
Fixing mode	By clips on 35 mm symmetrical DIN rail, operating position: horizontal; By clips on 35 mm symmetrical DIN rail, operating position: vertical
Output coupling	Parallel
Operating altitude	2000 m
Marking	CE
Name of test	Electrostatic discharges conforming to IEC 61000-4-2; Emission conforming to IEC 61000-6-3; Induced electromagnetic field conforming to IEC 61000-4-6 level 3; Radiated electromagnetic field conforming to IEC 61000-4-3 level 3; Rapid transient conforming to IEC 61000-4-4 level 3; Surge conforming to IEC 61000-4-5 level 2; Conducted/radiated emissions conforming to EN 55022 class B, 20 %
Local signalling	1 LED (green) for buffer ready; 1 relay for buffer ready
Net weight	1.2 kg
Contractual warranty
Warranty (in months)	18
Environment
Product certifications	RCM; EAC
Standards	UL 508; CSA C22.2 No 60950-1
Ambient air temperature for operation	-25…60 °C
Ambient air temperature for storage	-40…85 °C
Environmental characteristic	EMC conforming to IEC 61000-6-3; EMC conforming to IEC 61000-6-2; Safety conforming to IEC 60950-1; Safety conforming to EN/IEC 61204-3
IP degree of protection	IP20 conforming to IEC 60529
Dielectric strength	500 V between input and ground; 500 V between output and ground
Overvoltage category	Class II conforming to VDE 0106-1
Relative humidity	0…90 % during operation; 0…95 % during storage
MTBF reliability	1119603 H at 24 V DC with UTE C80-810 calculation method
Vibration resistance	2 gn (f= 11.9…150 Hz) conforming to IEC 61131-2; 3.5 mm (f= 3…11.9 Hz) conforming to IEC 61131-2
Logistical informations
Country of origin	PH
Main
Range of product	Phaseo
Product or component type	Buffer module
Input voltage	24...28.8 V DC
Output voltage	(Uin-0.25) V in nominal mode DC; (Uin-1) V in buffer mode DC
Maximum output current	40 A
Holding time	0.1 s at 40 A; 6 s at 0.5 A
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	11.500 cm
Package 1 Width	17.000 cm
Package 1 Length	18.200 cm
Package 1 Weight	1.401 kg
Unit Type of Package 2	P06
Number of Units in Package 2	60
Package 2 Height	75.000 cm
Package 2 Width	60.000 cm
Package 2 Length	80.000 cm
Package 2 Weight	97.060 kg

The Modicon ABL8 Universal series of switched-mode power supplies are ideal for most industrial applications and are designed in particular for direct current supply in automation applications. The ABL8 product family impresses with its compact and robust design and includes power supplies with an output voltage of 24V DC. This functional module for the Modicon ABL8 power supplies is used for short-term buffering of a 24V DC supply. This means that micro-interruptions in the supply networks can be compensated and do not lead to faults in automation applications. Depending on the power requirement, a buffer time of up to 2 seconds at 2 A or 0.2 seconds at 20 A can be achieved. The maximum current is 40A. An LED display provides information on the status of the buffer module and a diagnostic relay indicates the status. Suitable for international use due to the large number of existing product standards and certifications. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.