The BNS-Y-02 is a high-quality Y-adapter specifically designed for use with BNS series safety sensors. It enables the setup of two-channel series connections for safety sensors with two normally closed (NC) contacts.

The adapter features two 4-pin sockets and one 4-pin plug with an M8 ISO thread, ensuring easy and secure sensor connections. Due to its compact design and IP67 protection rating, the adapter is suitable for use in dusty and moist environments.

With the BNS-Y-02, a sensor chain can be created by adding additional Y-adapters in the direction of the arrow. The last safety sensor should be connected as the end of the extension.

Only safety sensors with the same contact configuration can be connected in series. BNS-Y-11 and BNS-Y-02 adapters must not be mixed. The maximum length of the series connection is 50 meters.
Technical Data – BNS-Y-02:

Order Information:

Product Type Designation: BNS-Y-02
Article Number: 101194060
EAN: 4030661358086

General Data:

Design: Y-Adapter
Electrical Connection:
2 x 4-pin sockets
1 x 4-pin plug
Gross Weight: 23 g

Mechanical Data:

Minimum Mechanical Lifespan: 100 plug cycles

Mechanical Data – Dimensions:

Length: 10 mm
Width: 23.5 mm
Height: 31 mm
ISO Thread Diameter: M8

Environmental Conditions:

Protection Rating: IP67
Ambient Temperature: -25 °C to +70 °C

Accessories:

Recommended Product Combinations:
BNS 33
BNS 36
BNS 260

Notes:

The BNS-Y-02 adapter is intended for safety sensors with two normally closed (NC) contacts.
The series connection can be extended by adding more Y-adapters.
Connection Cables: Any standard 4-pin cables with M8 plug and socket can be used.
Maximum Length of Series Connection: 50 meters.
Important: BNS-Y-11 and BNS-Y-02 adapters must not be mixed in a series connection.