Product description in English:

The BNS 260-11Z-ST-L magnetic safety sensor is ideally suited for monitoring protective devices, offering reliable performance under the highest safety requirements. Designed specifically for left-hinged doors, the sensor is built with fiberglass-reinforced thermoplastic, ensuring durability and resistance to external influences.

With a low coding level according to EN ISO 14119 and a switching power of up to 10 VA, the sensor is versatile in its applications. Featuring a switching distance of up to 15 mm, one NO, and one NC contact, it meets stringent safety standards. The M8 connector provides a quick and secure electrical connection.

Technical specifications:

Ordering information:

• Product type: BNS 260-11Z-ST-L
• Article number: 101184379
• EAN: 4030661321776
• eCl@ss number: 27-27-44-01
• ETIM number: EC002544

Approvals and standards:

• Certifications: cULus
• Standards: BG-GS-ET-14, EN IEC 60947-5-3

General specifications:

• Coding level: Low
• Operating principle: Magnetic
• Material: Fiberglass-reinforced thermoplastic
• Gross weight: 32 g

Mechanical specifications:

• Door hinge: Left
• Movement direction: Frontal to the active surface
• Dimensions: Length 13 mm, Width 26 mm, Height 36 mm
• Switching distances:
- Secured switching distance ON (Sao): 5 mm
- Secured switching distance OFF (Sar): 15 mm

• Connection type: M8 connector, tightening torque: 0.3 Nm

Electrical specifications:

• Switching voltage: max. 75 VDC
• Switching current: max. 0.4 A
• Switching power: max. 10 VA
• Switching element: 1 normally open (NO), 1 normally closed (NC)
• Switching frequency: max. 5 Hz

Environmental conditions:

• Protection class: IP67
• Operating temperature: -25 °C to +70 °C
• Vibration resistance: 10–55 Hz, amplitude 1 mm
• Shock resistance: 30 g / 11 ms

Delivery:

• The actuator is not included in the scope of delivery.

Accessories:

• Recommended actuators: BPS 260
• Recommended safety control units: SRB-E-301ST, SRB-E-201LC

Notes:

• Pin assignment for versions with an integrated connector is specified in parentheses.
• Contacts S13-S14 and S21-S22 must be integrated into the safety circuit.