Product description in English:

The BNS 260-11Z-ST-R magnetic safety sensor is a reliable solution for safety-critical applications in machinery and equipment. Featuring low coding level compliance with EN ISO 14119 and a durable housing made of fiberglass-reinforced thermoplastic, this sensor ensures long-lasting and dependable performance.

The sensor is specifically designed for right-hinged doors and tolerates horizontal and vertical misalignments between the sensor and actuator. It includes one normally closed (NC) and one normally open (NO) contact, rated for a service life of up to 20 years and 25,000,000 switching cycles (B10D) according to EN ISO 13849-1.

Technical specifications:

Ordering information:

• Product designation: BNS 260-11Z-ST-R
• Article number: 101184363
• EAN: 4030661321608
• eCl@ss number: 27-27-44-01
• ETIM number: EC002544

Approvals and standards:

• Certifications: cULus
• Standards: BG-GS-ET-14, EN IEC 60947-5-3

General specifications:

• Coding level: Low
• Operating principle: Magnetic
• Material: Fiberglass-reinforced thermoplastic
• Gross weight: 32 g

Mechanical specifications:

• Door hinge: Right
• Dimensions: Length 13 mm, Width 26 mm, Height 36 mm
• Switching distances:
- Secured switching distance ON (Sao): 5 mm
- Secured switching distance OFF (Sar): 15 mm

• Connection: M8 connector, tightening torque 0.3 Nm
• Movement direction: Frontal to the active surface

Electrical specifications:

• Switching voltage: max. 75 VDC
• Switching current: max. 0.4 A
• Switching power: max. 10 VA
• Switching elements: 1 normally open (NO), 1 normally closed (NC)
• Switching frequency: max. 5 Hz

Environmental conditions:

• Protection class: IP67
• Operating temperature: -25 °C to +70 °C
• Vibration resistance: 10–55 Hz, amplitude 1 mm
• Shock resistance: 30 g / 11 ms

Delivery:

• Actuator is not included in the scope of delivery.

Accessories:

• Recommended actuators: BPS 260
• Recommended safety control units: SRB-E-301ST, SRB-E-201LC

Notes:

• Contacts S13-S14 and S21-S22 must be integrated into the safety circuit.
• Pin assignments for versions with integrated connectors are specified in parentheses.