| General |
| Product type | Safety position switch |
| Operating principle | Electromechanical |
| Degree of protection | IP67 |
| Operating voltage | 230 VAC, 24 VDC |
| Thermal continuous current | 10 A |
| Switching principle | Creepage circuit |
| Forced opening path | 8 mm |
| Forced opening force | min. 10 N |
| Latching force | 30 N |
| Maximum actuation speed | 2 m/s |
| Mechanical life | min. 1,000,000 Switching operations |
| B10D (NC) | 2.000.000 Switching operations |
| B10D (NO) | 1.000.000 Switching operations |
| Performance Level (PL) | up to c |
| Category | 1 |
| Service life | 20 years |
| Number of starting directions | 3 |
| Safety contacts | 1 |
| Auxiliary contacts | 1 |
| Connection system | Screw terminals |
| Connection cross section | 0,25–2,5 mm² |
| Cable entry | 3 x M20 x 1,5 |
| Ambient temperature | -30 to +80 °C |
| Storage and transport temperature | -40 to +85 °C |
| Maximum installation height | 2.000 m above sea level |
| Material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Certificates | cULus, CCC |
| Standards | EN ISO 13849-1, EN ISO 14119, EN IEC 60947-5-1 |
| Coding stage | low |
| Maximum switching frequency | 4.000 /h |
| Rated short-circuit current | 1.000 A |
The safety position switch AZ 16 ZVRK-M20 from Schmersal is an electromechanical device for safe monitoring and position detection in industrial applications. It serves as a mechanical end switch used in safety-critical systems to monitor the state of a machine or plant. The device is designed for use in environments with high mechanical and thermal loads and meets the requirements of modern safety concepts. The construction from glass-fibre-reinforced, self-extinguishing thermoplastic ensures high mechanical stability and resistance to external influences.
Applications
The switch is intended for use in industrial automation technology, particularly in systems designed according to standards EN ISO 13849-1 and EN ISO 14119. It is suitable for applications requiring safe position detection, for example in manufacturing automation, packaging technology, or machine building. The protection rating IP67 makes it suitable for outdoor use or in humid environments, as it is dust- and waterproof.
Functions and Equipment in Detail
The AZ 16 ZVRK-M20 features a forced-opening normally closed contact (1 NC) and an auxiliary contact (1 NO), with the safety contact operating according to the creep circuit principle. The forced opening ensures that the contact will safely open even in case of mechanical failure. The maximum actuation speed is 2 m/s, making it suitable for fast drives. The latching force of 30 N ensures secure and reliable actuation. The mechanical life is at least 1,000,000 switching operations, with a service life designed for 20 years.
Technology Explained Simply
The switch operates electromechanically, with electrical contacts switched by mechanical actuation. The forced opening occurs over a defined path of 8 mm at a force of at least 10 N. This ensures that the contact will safely open even in case of mechanical defect or contamination. The switching principles are designed to meet the requirements of safety category 1 and performance level PL c. The B10D values (2,000,000 for NC, 1,000,000 for NO) indicate the number of switching operations after which 10% of contacts are still functional.
Compatibility and Accessories
The switch is equipped with three M20 x 1.5 cable entries suitable for cable cross-sections from 0.25 to 2.5 mm², including wire end ferrules. Connection is made via screw terminals. As suitable accessories, the position switch XCSTA592 (plastic, 2S+1Ö, stepped, M16) is offered, which is suitable for similar applications.
Mounting and Installation
Mounting is done via the three M20 x 1.5 entries, ensuring a secure and tight connection. The maximum installation height is 2,000 m above sea level, making the switch suitable for use in high-altitude installations. The ambient temperature must be between -30 °C and +80 °C, while storage and transport temperatures up to +85 °C are permitted. Installation is typically done on machine parts requiring safe position detection.
Advantages in Operation
The switch offers high reliability due to forced opening and long service life. The IP67 protection rating enables use in harsh environments. The electrical data (AC-15: 230 VAC, 4 A; DC-13: 24 VDC, 4 A) are designed for typical industrial applications. The maximum switching frequency of 4,000 operations per hour makes it suitable for dynamic processes. Certifications cULus and CCC, along with compliance with standards EN ISO 13849-1, EN ISO 14119, and EN IEC 60947-5-1, ensure conformity with international safety standards.