Schmersal 101154221, EAN: 4030661171586

Schmersal 101154221 AZ 16-12ZVRK Safety Switch Separate Actuator

Industrial Material > Control devices / Pilot devices > Limit switches, mechanical

Schmersal 101154221 AZ 16-12ZVRK Safety Switch Separate Actuator

Lieske Part No. 298184
Mfg Part No 101154221
EAN-Code 4030661171586
Manufacturer Schmersal
Here only 45,25 EUR
53,85 EUR incl. VAT

Further information for Schmersal 101154221 AZ 16-12ZVRK Safety Switch Separate Actuator

General
Product typeSafety switch
Operating principleElectromechanical
Housing materialglass-fibre reinforced thermoplastic
Degree of protectionIP67
Number of safety contacts2
Number of auxiliary contacts1
Switching principleCreepage switching, forced-opening normally closed contact (NC)
Contact materialSilver
Number of cable entries3
Cable entryM16 x 1.5
Connection systemScrew terminals
Minimum cross-sectional area for connection0,25 mm²
Maximum connection cross-section2,5 mm²
Mounting2x M6
Latching force30 N
Forced opening path8 mm
Forced opening force per normally closed contactmin. 10 N
Actuation speed max.2 m/s
Mechanical lifemin. 1,000,000 Switching operations
B10D Normally closed contact (NC)2.000.000 Switching operations
B10D Normally open contact (NO)1.000.000 Switching operations
Service life20 years
Thermal continuous current10 A
Rated insulation voltage500 V
Rated surge voltage invariability6 kV
Over voltage categoryIII
Pollution degree3
Ambient temperature-30 to +80 °C
Maximum installation height2.000 m
Maximum switching frequency4.000 /h
CertificationscULus, CCC, EN ISO 13849-1, EN ISO 14119, EN IEC 60947-5-1
Coding stageLow according to EN ISO 14119
Performance levelup to PL c
Category1 (up to 3 with 2-channel use and suitable logic unit)
Storage and transport temperature-40 to +85 °C
Rated short-circuit current1.000 A
Voltage (AC-15) safety contacts230 VAC
Current (AC-15) safety contacts4 A
Voltage (DC-13) safety contacts24 VDC
Self-extinguishingYes
The safety switch AZ 16-12ZVRK-M16 from Schmersal is an electromechanical switch designed for use in safety-critical applications in industry. It features a robust housing made of glass-fibre-reinforced thermoplastic, which is self-extinguishing and thus ensures high mechanical load capacity and fire prevention. The switch is equipped with two safety contacts (NC) and one auxiliary contact (NO), making it suitable for both safety functions and additional control tasks. The protection rating IP67 provides complete protection against dust and water, making it suitable for use outdoors or in humid environments. The mechanical life is at least 1,000,000 switching operations, ensuring high reliability over a long period. Operation is via a separate actuator, with a latching force of 30 N and a forced opening travel of 8 mm. The forced opening force per opening contact is at least 10 N, ensuring secure and reliable contact separation even under load. The maximum actuation speed is 2 m/s, enabling use in dynamic applications. Mounting is via two M6 screws, ensuring secure installation on machines or equipment.

Applications

The switch is intended for use in safety-relevant systems such as machines, plants, or production lines, where reliable shutdown is required in hazardous situations. It is particularly suitable for applications requiring high mechanical load capacity, resistance to environmental influences, and long service life. The IP67 protection rating also makes it suitable for use in humid or dusty environments, for example in the food industry, outdoors, or in the chemical industry. The three cable entries allow flexible installation and adaptation to different wiring situations.

Functions and Equipment in Detail

The switch features three cable entries with M16 x 1.5, enabling flexible wiring. Connection is via screw terminals suitable for wire cross-sections from 0.25 mm² to 2.5 mm². Both rigid and flexible wires can be used. The switching principle is implemented as a creepage circuit, with safety contacts designed as forced-opening contacts (NC). The contact materials are made of silver, ensuring high electrical conductivity and resistance to wear. The maximum switching frequency is 4,000 operations per hour, enabling high operational speed. The thermal continuous current rating is 10 A, making the switch suitable for a wide range of electrical loads.

Technology Explained Simply

The switch operates on an electromechanical principle, where mechanical actuation via an actuator opens or closes the electrical contacts. The forced opening of safety contacts (NC) ensures that the contact is safely opened even in case of mechanical failure or damage, providing high safety. The B10D values (2,000,000 switching operations for openers, 1,000,000 for closers) indicate after how many operations 10% of the contacts will fail, quantifying reliability over the service life. The service life of 20 years underscores the durability of the device. Insulation ratings, such as the rated insulation voltage of 500 V and the rated impulse voltage withstand of 6 kV, demonstrate electrical safety and suitability for industrial applications.

Compatibility and Accessories

The switch is equipped with three cable entries, allowing flexible integration into various systems. As suitable accessories, the position switch XCSTA792 is offered, designed as a stepped model with 1S+2Ö for M16 connections. This accessory can be used to extend functionality or adapt to specific actuation situations. Certifications according to EN ISO 13849-1, EN ISO 14119, and EN IEC 60947-5-1, as well as approvals cULus and CCC, confirm compliance with international safety and quality standards. The coding level is defined as low according to EN ISO 14119, confirming suitability for specific safety requirements.

Mounting and Installation

Mounting is via two M6 screws, enabling secure fastening to machines or equipment. The three cable entries with M16 x 1.5 offer flexibility in wiring. The connection terminals are designed for wire cross-sections from 0.25 mm² to 2.5 mm², allowing both thin and thick wires to be connected. The ambient temperature range is -30 °C to +80 °C, enabling use in climatically demanding environments. The maximum installation height is 2,000 m, allowing use in high mountain regions or high-rise buildings. Storage and transport temperature ranges from -40 °C to +85 °C, ensuring safe storage under various conditions.

Operational Advantages

The switch offers high mechanical and electrical reliability, increasing operational safety in industrial systems. The long service life of 20 years and the high mechanical life of at least 1,000,000 switching operations reduce maintenance and replacement frequency. The IP67 protection rating protects against dust and water, expanding application possibilities. The flexible wiring options via three cable entries and compatibility with accessories such as the XCSTA792 increase adaptability to different requirements. Certifications according to international standards ensure compliance with safety standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/298184
qrcode für Schmersal 101154221 AZ 16-12ZVRK Safety Switch Separate Actuator