| General |
| Product type | electromechanical safety switch |
| Number of safety contacts | 3 |
| Switching principle | Creepage switching, forced-opening normally closed contact (NC) |
| Degree of protection | IP67 |
| Operating voltage | 230 VAC / 24 VDC |
| Rated current | 4 A |
| Thermal continuous current | 10 A |
| Rated insulation voltage | 500 V |
| Rated surge voltage invariability | 6 kV |
| Over voltage category | III |
| Pollution degree | 3 |
| Performance level | up to PL c |
| Category | 1 (up to 3 in 2-channel operation) |
| Service life | 20 years |
| Latching force | 30 N |
| Forced opening path | 8 mm |
| Forced opening force per normally closed contact | at least 10 N |
| Total forced opening force | at least 30 N |
| Actuation speed | max 2 m/s |
| Number of starting directions | 3 |
| Number of cable entries | 3 |
| Cable entry | 3 x M16 x 1,5 |
| Connection type | Screw terminals |
| Connection cross section | 0.25 to 2.5 mm² |
| Mounting | Screws (2x M6) |
| Ambient temperature | -30 to +80 °C |
| Storage and transport temperature | -40 to +85 °C |
The
electromechanical safety switch AZ 16-03ZVRK-M16 from Schmersal is designed for safety-critical applications in industry. It features
three safety contacts (normally open, NC) and complies with the requirements of standard
EN ISO 13849-1, making it suitable for use in safety-related control systems. The construction ensures a high level of tamper protection, with the
forced opening function ensuring that the contacts are safely opened even in the event of mechanical interference. The
protection rating IP67 makes the switch suitable for outdoor use or in damp, dusty environments, as it is dust- and waterproof.
Applications include machine controls, safety devices on machine tools, presses, conveyor systems, and other installations where the safety of operators and machinery is paramount. The
triple approach direction allows for flexible mounting and integration into existing systems. The
three cable entries with M16 thread simplify installation and provide connection options for various cables.
Functions and equipment in detail include a
creepage circuit with forced-opening normally open contacts, ensuring safe disconnection of the circuit. The
latching force is 30 N, enabling secure locking of the switch during actuation. The
forced opening travel of 8 mm and
at least 10 N per contact ensure reliable and mechanically secure opening. The
total forced opening force is at least 30 N, increasing reliability under mechanical stress. The
maximum actuation speed of 2 m/s enables use in dynamic applications.
Technology explained simply shows that the switch is made of
glass-fibre-reinforced thermoplastic, which is self-extinguishing and thus offers high fire resistance.
Mounting is done via two M6 screws, enabling stable installation on machines or enclosures. The
connection terminals are designed for a conductor cross-section of
0.25 mm² to 2.5 mm², covering a wide range of cable types. The
rated insulation voltage of 500 V and
overvoltage category III make the switch suitable for industrial applications with high electrical loads. The
pollution degree 3 indicates that the switch is designed for environments with increased contamination.
Compatibility and accessories include use with compatible position switches such as the XCSTA892, also offered by Schmersal. This can be used as a separate actuator to extend the functionality of the safety switch. The
cable entries M16 x 1.5 are standardized and allow use with common cable glands.
Mounting and installation are carried out via the designated screw holes (2x M6) on the rear of the housing. The three cable entries allow flexible arrangement of the cables.
Operational advantages include a high mechanical service life of
at least 1,000,000 switching cycles and a
service life of 20 years, enabling long-term reliability and low maintenance frequency. The
performance level up to PL c and
category 1 (up to 3 with dual-channel use) meet the requirements for safety-critical systems. The
maximum switching frequency of 4,000 switching operations per hour makes the switch suitable for high operational loads. The
thermal continuous current rating of 10 A and
rated short-circuit withstand current of 1,000 A ensure safe operation under high electrical loads.
The
ambient temperature range of -30 °C to +80 °C allows use in a wide range of industrial environments, even under extreme temperatures. The
storage and transport temperature range of -40 °C to +85 °C demonstrates the robustness of the device even during transport and storage under extreme conditions.
The switch is designed for use in
industrial installations where high safety and reliability are required. The
certifications cULus and CCC as well as compliance with standards
EN ISO 14119 and
EN IEC 60947-5-1 confirm conformity with international safety and quality requirements.