Schmersal 101153619

Schmersal 101153619 AZ 15 ZVRK Safety Switch

Industrial Material > Control devices / Pilot devices > Limit switches, mechanical

Schmersal 101153619 AZ 15 ZVRK Safety Switch

Lieske Part No. 550527
Mfg Part No 101153619
EAN-Code
Manufacturer Schmersal
Here only 36,43 EUR
43,35 EUR incl. VAT

Further information for Schmersal 101153619 AZ 15 ZVRK Safety Switch

General
Switch typeSafety switch
Type of excitationseparate actuator
Switching function2S+1Ö
Actuation mechanismStepped
ThreadM16
AccessoriesXCSTA592 position switch plastic 2S+1NC stepped M16
The Schmersal AZ 15 ZVRK is a mechanical safety switch with a separate actuation mechanism, designed for use in industrial applications, particularly in machine and plant control. It serves as a limit switch for safe shutdown or signaling of end positions in machines, for example, with protective grilles, doors, or covers. The construction allows for a clear separation between the switch itself and the actuation component, simplifying installation and maintenance while reducing mechanical stress. The switch is designed for use in safety-critical systems and meets the requirements for safety functions according to applicable standards.

Applications

The AZ 15 ZVRK is used in the manufacturing industry, machine building, and automation technology, where reliable and safe shutdown is required upon reaching an end position. It is particularly suitable for systems where the actuation mechanism is subject to mechanical stress, for example, due to frequent opening and closing of protective grilles. The separate design allows for flexible installation, with the switch body positioned independently of the actuation component, which is advantageous in complex machine constructions.

Functions and Equipment in Detail

The switch features an integrated position switch operating via a stepped actuation component (2S+1Ö). The designation 2S+1Ö describes the number of switching contacts: two closing contacts and one opening contact. This configuration enables parallel control of multiple functions, for example, machine shutdown and simultaneous status signaling. The actuation component is designed for mounting with an M16 thread, ensuring standardized fastening to machine components. The separate design reduces mechanical stress on the switch and increases its service life.

Technology Explained Simply

The switch operates mechanically, without electronic control. Actuation is achieved by mechanical pressure on the actuation component, which is connected to the switch via a rod or lever. Upon reaching the end position, the contact is closed or opened, depending on the configuration. The separate design means that the switch body and the actuation component are not directly connected, but coupled via a mechanical connection (e.g., rod). This reduces mechanical stress on the switch and enables flexible installation. The switching function is performed by a mechanical lever mechanism that changes the contacts according to the actuation.

the switching function is performed by a mechanical lever mechanism that changes the contacts according to the actuation.

Compatibility and Accessories

For the Schmersal AZ 15 ZVRK, the accessory XCSTA592 position switch plastic 2S+1Ö stepped M16 is available. This accessory is specifically designed for use with the AZ 15 ZVRK and enables an additional switching function. Mounting is via the M16 thread, ensuring standardized and secure fastening. The accessory can be used to extend switching functions or to adapt to specific machine requirements.

Installation and Mounting

The switch is mounted via the M16 thread, intended for securing the actuation component. The switch body itself is mounted at a suitable location, with the mechanical connection to the actuation component established via a rod or lever. Installation does not require special tools, but precise alignment of the actuation component is necessary to ensure correct switching function. Mounting typically occurs on metallic or rigid machine components to ensure stable fastening.

Operational Advantages

The AZ 15 ZVRK offers high reliability due to its mechanical design and the separate construction of switch and actuation component. The separate design reduces mechanical stress and increases the switch’s service life. The switching function is clearly defined and can be easily checked. The use of standardized threads (M16) enables simple installation and interchangeability. The switching function is independent of electrical or electronic components, increasing robustness and simplifying maintenance.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/550527
qrcode für Schmersal 101153619 AZ 15 ZVRK Safety Switch