The AZ/AZM 415-B2 actuator by Schmersal is a versatile and movable safety switch actuator suitable for both hinged and sliding doors. With a minimum actuation radius of 250 mm and a high shear force of 25,000 N, this actuator provides reliable protection in industrial safety applications.

The actuator is straight and adjustable, allowing for flexible positioning. The actuator mounts are equipped with pin holes to prevent disassembly by inserting dowel pins. The actuation radius can be precisely adjusted using the internal hex screw ("a") with a hex key size SW 4.

An important installation note is that the pivot point of the hinge and the top edge of the safety switch must be aligned, with an additional clearance of 36 mm.

Weighing only 160 g, the actuator is lightweight and easy to install while offering maximum stability and safety.
Technical Data:

Product Type Designation:

AZ/AZM 415-B2

Article Number (Order Number):

101144796

EAN (European Article Number):

4030661134307

eCl@ss Numbers:

Version 12.0: 27-27-26-06
Version 11.0: 27-27-26-06
Version 9.0: 27-27-26-06

ETIM Numbers:

Version 7.0: EC001487
Version 6.0: EC001487

General Data:

Gross Weight:

160 g

Mechanical Data:

Minimum Actuation Radius:

250 mm

Actuator Type:

Straight
Movable

Shear Force:

25,000 N

Note (General):

The pivot point of the hinge and the top edge of the safety switch must be aligned, with an additional clearance of 36 mm.
The actuator mounts are equipped with pin holes. Inserting dowel pins prevents the actuator from being disassembled.
By adjusting the internal hex screw a, the actuator can be brought into any desired position.
The actuator can also be used for sliding doors.
Actuation radius adjustable to a minimum of 250 mm with a hex key size SW 4.