| General |
| Operating voltage | 24 VAC/DC |
| Degree of protection | IP67 |
| Latching force | 30 N |
| Actuation speed | 2 m/s |
| Connection type | cutting terminal technology |
| Connection cross section | 0,75–1 mm² |
| Cable entry | M20 x 1.5 |
| Mounting | 2x M5 screws |
| Housing material | glass-fibre reinforced thermoplastic |
| Performance Level (single-channel) | up to c (Category 1) |
| Performance Level (2-channel) | up to d (Category 3) |
| Ambient temperature | -25 to +60 °C |
| Storage temperature | -25 to +85 °C |
| Electrical power consumption | 12 W |
| Safety contacts | 2 normally closed contacts (NC) |
| Voltage (AC-15) | 230 VAC |
| Current (AC-15) | 4 A |
| Voltage (DC-13) | 24 VDC |
| Current (DC-13) | 2,5 A |
| Number of starting directions | 2 |
| Auxiliary unlocking | bottom, manual with hex key M5 |
| Operating principle | Electromechanical |
| Coding stage | low |
| Service life | 20 years |
The Schmersal AZM 170-02ZRK 24VAC/DC is an electromechanical safety switch with integrated latching, specifically designed for use in movable, removable or rotatable safety devices. It ensures secure interlocking of machine parts and guarantees that the machine can only be operated when the safety device is properly closed. The device meets the requirements of standards EN ISO 13849-1 and EN ISO 14119 and operates on the fail-safe principle, which provides high reliability as the switch automatically returns to the safe position in case of failure.
Applications
The switch is intended for use in industrial machines and plants, particularly in areas where movable safety devices such as sliding doors, covers or rotating grilles are used. The latching mechanism ensures that the safety device cannot be accidentally opened during operation, thereby ensuring operator safety. The maximum latching force is 1,300 N, with the standard latching force (FZh) being 1,000 N, which is sufficient for most industrial applications.
Functions and Equipment in Detail
The AZM 170-02ZRK 24VAC/DC features two safety contacts configured as openers (NC). These enable secure signal transmission to the machine’s control system. The mechanical service life is 1,000,000 switching cycles, with B10D values for contacts at 2,000,000 switching cycles (openers) and 1,000,000 switching cycles (closers). The latching force is 30 N, enabling secure interlocking even with low actuation forces. The maximum actuation speed is 2 m/s, suitable for fast actuations in automated processes.
Technology Explained Simply
The switch operates on the fail-safe principle, meaning the latching mechanism is only activated when the operating voltage (24 VAC/DC) is present. In case of power failure or malfunction, the latching mechanism is automatically released to ensure safe machine shutdown. The IDC (insulation displacement connector) technology allows connection of flexible conductors with a cross-section of 0.75 to 1 mm² without wire end ferrules, simplifying installation. Cable entry is via an M20 x 1.5 threaded connection, which is covered with a slotted cap to minimize environmental exposure.
Compatibility and Accessories
The switch is designed for use in systems with 24 VAC/DC operating voltage and can be used in single- or dual-channel systems. The performance level reaches up to c (Category 1) for single-channel and up to d (Category 3) for dual-channel applications. As an accessory, a position switch XCS-TE7312 magnetic interlock 24 V is available, which can be used for additional safety or signal transmission.
Mounting and Installation
Mounting is done using two M5 screws inserted into the designated holes in the housing. The housing is made of glass-fibre reinforced thermoplastic, providing high mechanical stability and resistance to mechanical stress. Dimensions are 30 mm (length) × 90 mm (width) × 84 mm (height). The IP67 protection rating makes the switch suitable for outdoor use or in humid environments, as it is dust- and waterproof. The operating temperature range is -25 °C to +60 °C, and the storage temperature range is -25 °C to +85 °C.
Advantages in Operation
The switch offers high operational safety through the fail-safe principle and integrated latching. The robust construction from glass-fibre reinforced thermoplastic ensures long service life and resistance to mechanical and chemical stresses. Simple installation via IDC technology and integrated cable entry reduces installation time. Certifications including IFA, cULus and CCC, along with compliance with standards EN ISO 13849-1 and EN ISO 14119, ensure conformity with international safety requirements. The service life is 20 years, ensuring long-term usability in industrial plants.
The delivery includes a slotted cap for covering the cable entry.