| General |
| Material | Stainless steel (V2A) |
| Actuation radius, min. | 140 mm |
| Operating radius, min. (wide side) | 200 mm |
| Actuator type | angled |
| Offset | 13 mm |
The AZ 17/170-B5 actuator from Schmersal is an angled safety switch actuator specifically designed for use with safety switches of the AZ 17 series. It serves as a mechanical activator that triggers the switch when a rotating protective device moves, ensuring a safe shutdown. The actuator is made of stainless steel (V2A), making it corrosion-resistant and suitable for use in industrial environments with high stress.
Applications
The actuator is intended for rotating protective devices where compact and precise actuation is required. It is typically used in machine building, manufacturing technology, and other areas where mechanical safety functions are implemented via mechanical actuation. The angled shape allows optimal adaptation to the geometry of the protective device and ensures reliable triggering of the safety switch.
Functions and Equipment in Detail
The actuator enables a minimal actuation radius that varies depending on orientation: 140 mm over the narrow side and 200 mm over the wide side. These values are crucial for planning the installation and positioning of the protective device. To ensure correct function, the hinge pivot point and the top edge of the safety switch must lie in the same plane, with an offset of 13 mm maintained. This geometric arrangement ensures that the actuator reliably triggers the safety switch when the protective device moves.
Technology Explained Simply
The actuator is made of stainless steel (V2A), a material preferred in industrial applications due to its high corrosion resistance and mechanical strength. The angled shape of the actuator allows for compact mounting and efficient force transmission. The exact dimensions of the actuation radius are important to ensure that the protective device triggers the switch even with minimal movement, thereby increasing safety. The requirement for a 13 mm offset between the pivot point and the top edge of the switch is a geometric prerequisite for correct alignment and function.
Compatibility and Accessories
The AZ 17/170-B5 actuator is specifically designed for use with Schmersal safety switches of the AZ 17 series. Compatible accessories available in the range include the XCSZ15 actuator for XCS switches. These components are suitable for integration into existing safety concepts, with the exact selection tailored to the specific switch configuration and machine requirements.
Mounting and Installation
Installation requires precise alignment of the actuator with the protective device. The hinge pivot point and the top edge of the safety switch must lie in the same plane, with an offset of 13 mm maintained. The actuator is mounted on the protective device, taking into account the minimal actuation radii of 140 mm (narrow side) and 200 mm (wide side) to ensure that the switch is triggered when the protective device moves.
Operational Advantages
The actuator provides reliable and precise triggering of the safety switch with minimal movement of the protective device. The use of stainless steel (V2A) ensures high durability and resistance to corrosion, increasing maintenance-free operation and operational safety. The angled shape allows flexible adaptation to various mounting geometries, facilitating integration into existing machine constructions.