| General |
| Degree of protection | IP65 |
| Operating voltage | 90 ... 250 VAC |
| Switching distance | 10 mm |
| Switching frequency | ca. 10 Hz |
| Operating voltage frequency | 45 ... 65 Hz |
| Operating current, min. | 10 mA |
| Rated operation current | 500 mA |
| Switching element | normally open contact (NO) or normally closed contact (NC) |
| Connection type | Screw connection PG9 |
| Connection cross-section, max. | 1 x 1,5 mm² |
| ISO thread | M30 |
| Wrench width | 36 SW |
| Length of sensor | 126 mm |
| Ambient temperature | -25 ... +70 °C |
| Vibration resistance | 10 ... 55 Hz |
| Shock resistance | 30 g / 11 ms |
| Protection class | II |
| Rated surge voltage invariability | 4 kV |
| Maximum tightening torque of nuts | 30 Nm |
| Housing material | Brass |
| Material of housing coating | Nickel-plated |
| Material of active surfaces | Plastic |
| Material of nut | Brass |
| Status indicator | Yellow LED |
| Number of cable cores | 2 |
| Integrated protective circuitry | induction protection |
| Voltage drop Ud, max. | 4,5 V |
| Current at voltage drop Ud | 0,2 A |
| Residual current Ir, max. | 1 mA |
| Switching elements | Two-wire |
The IFL 10-30-10/01YG from Schmersal is a cylindrical proximity sensor for industrial applications, used in machine and plant engineering due to its robust construction and precise switching functions. The device features a housing made of nickel-plated brass, designed for flush mounting, enabling optimal integration in limited mounting areas. The active surface is made of plastic, ensuring high mechanical load capacity and chemical resistance. The yellow LED status indicator allows for visual monitoring of the operating state, simplifying the diagnosis of faults or malfunctions.
Applications
The sensor is designed for use in industrial environments, particularly in plants requiring high reliability and longevity. It is suitable for applications such as position monitoring of moving components, detection of workpieces in the manufacturing process, or securing machine covers. The operating temperature range of -25 to +70 °C makes it suitable for use in environments with varying climatic conditions, such as production halls or outdoor areas under protective conditions.
Functions and Equipment in Detail
The IFL 10-30-10/01YG operates as an inductive proximity sensor, detecting metallic objects at a distance of up to 10 mm. The switching function is performed via a two-wire switching element, which can be configured as either a normally open (NO) or normally closed (NC) contact. Programming is done in the connection area by repositioning the plug, enabling flexible adaptation to different requirements. The integrated inductive protection circuit protects the sensor against disturbances caused by electromagnetic fields and enhances operational safety.
Technology Explained Simply
The sensor detects metallic objects through inductive coupling, generating a high-frequency electromagnetic field. When a metallic object enters the switching distance of 10 mm, the impedance of the coil changes, triggering the switch. The operating voltage is in the range of 90 to 250 VAC, ensuring broad compatibility with industrial power supplies. The switching frequency is approximately 10 Hz, sufficient for continuous or intermittent switching operations. The maximum voltage drop during switching is 4.5 V, limiting power loss in the switching circuit.
Compatibility and Accessories
The sensor is equipped with a screw connection PG9, supporting a maximum connection cross-section of 1 x 1.5 mm². Mounting is done via an M30 thread, with a wrench size of 36 mm. As an alternative to the supplied nuts, a clamp can be used, simplifying installation in certain plant configurations. The protection rating IP65 ensures protection against dust and splashing water, enabling use in humid or dusty environments.
Mounting and Installation
Flush mounting of the sensor requires a precisely fitting bore with M30 thread. The maximum tightening torque for the nuts is 30 Nm, ensuring secure fastening without damaging the housing. The sensor length is 126 mm, which must be considered during mounting position planning. The yellow LED indicator is directly mounted on the housing, allowing direct visual control of the operating state.
Advantages in Operation
The IFL 10-30-10/01YG offers high mechanical and electrical robustness, reflected in a long service life and low maintenance frequency. The integrated protection circuit and high vibration and shock resistance (10–55 Hz, amplitude 1 mm; 30 g / 11 ms) make it suitable for dynamic operating conditions. The protection class II and rated impulse voltage withstand of 4 kV ensure reliable operation even under transient voltage surges. The operating voltage range of 90 to 250 VAC allows easy integration into existing industrial power supplies.
Protection Rating and Environmental Conditions
The protection rating IP65 protects the sensor against dust and splashing water, making it suitable for industrial environments with increased contamination risk. The ambient temperature range of -25 to +70 °C enables use in a wide variety of climatic conditions. The vibration and shock resistance ensures reliable function even under mechanical loads, as encountered in production plants or machine engineering.
Certifications and Standards
The sensor complies with standards DIN VDE 0660-208 and EN IEC 60947-5-2, which apply to the safety and functionality of switching devices in electrical engineering. Additionally, it is certified with the CCC certificate, confirming compliance with Chinese safety requirements. Adherence to these standards ensures safe and reliable operation in industrial applications.