Product Description in English:

The TKF/S/90230VAC is a robust electromechanical safety switch designed to provide high holding force up to 4,000 N. The housing is made from durable aluminum, and the switch can be approached from up to three directions. With an IP67 protection rating, the switch is protected against dust and water, making it suitable for demanding industrial environments. The TKF/S/90230VAC features forced-opening contacts in compliance with EN ISO 14119, ensuring the highest safety standards. It includes two safety contacts and two auxiliary contacts and can be used in both AC and DC circuits.

Technical Data:

Product Type:

• TKF/S/90230VAC

Article Number:

• 101010257

EAN:

• 4030661612409

eCl@ss Classification:

• Version 12.0: 27-27-26-03
• Version 11.0: 27-27-26-03
• Version 9.0: 27-27-26-03

ETIM Classification:

• Version 7.0: EC002593
• Version 6.0: EC002593

Approvals:

• cULus
• CCC

General Data:

• Standards: EN ISO 13849-1, EN ISO 14119, EN IEC 60947-5-1
• Coding Level According to EN ISO 14119: Low
• Operating Principle: Electromechanical
• Housing Material: Aluminum
• Gross Weight: 1,459 g

Features:

• Number of Approach Directions: 3
• Number of Auxiliary Contacts: 2
• Number of Safety Contacts: 2

Safety Consideration:

• Standards: EN ISO 13849-1
• Service Life: 20 years
• B10D NC Contact: 2,000,000 operations
• B10D NO Contact: 1,000,000 operations

Mechanical Data:

• Mechanical Lifespan: At least 2,000,000 operations
• Holding Force FZh (EN ISO 14119): 3,000 N
• Maximum Holding Force Fmax: 4,000 N
• Latching Force: 20 N
• Minimum Forced Opening Force: 20 N
• Maximum Actuation Speed: 0.3 m/s

Connection Technology:

• Connection Type: Screw Terminals
• Connection Cross-Section: 0.25 mm² to 2.5 mm² (including ferrules)

Dimensions:

• Length: 50 mm
• Width: 87 mm
• Height: 192 mm

Environmental Conditions:

• Protection Rating: IP67
• Operating Temperature: 0 to +50 °C
• Relative Humidity: Non-condensing, non-freezing
• Maximum Installation Altitude: 2,000 m

Isolation Ratings:

• Rated Insulation Voltage Ui: 400 V
• Rated Impulse Withstand Voltage Uimp: 2.5 kV

Electrical Data:

• Thermal Continuous Current: 10 A
• Rated Control Supply Voltage: 230 VAC
• Maximum Power Consumption: 10 W
• Switching Principle: Slow-action, positive-opening contacts
• Maximum Switching Frequency: 1,000 cycles/h
• Contact Material: Silver

Magnet Control:

Duty Cycle: 100 %

Maximum Test Pulse Duration: 5 ms

Minimum Test Pulse Interval: 50 ms

Safety Contacts:

Voltage, AC-15 Category: 230 VAC

Current, AC-15 Category: 8 A

Voltage, DC-13 Category: 24 VDC

Current, DC-13 Category: 5 A

Auxiliary Contacts:

Voltage, AC-15 Category: 230 VAC

Current, AC-15 Category: 8 A

Voltage, DC-13 Category: 24 VDC

Current, DC-13 Category: 5 A

Scope of Delivery:

The actuator is not included.