| General |
| Number of RJ-45 ports | 24 |
| Speed of RJ-45 ports | 2,5 Gbit/s |
| PoE standard | 802.3bt |
| PoE budget | 740 W |
| Number of SFP28 ports | 4 |
| Speed SFP28 ports | 25 Gbit/s |
| Layer functionality | 3 |
| Rack format | 19" |
| Rack height | 1U |
The Ruckus ICX8200-24ZP is a fully managed Layer 3 switch designed for integration into modern, high-performance network infrastructures. It features 24 Multigigabit ports with a speed of 2.5 Gbit/s, equipped with PoE++ (802.3bt), and provides a PoE budget of 740 W. These specifications make the switch particularly suitable for applications requiring high power delivery and bandwidth, such as Wi-Fi 6/6E/7 access points, IoT devices, and other bandwidth-intensive end devices. The four SFP28 uplink ports support a data rate of 25 Gbit/s and enable fast connection to the network backbone. The switch is designed as a 48,3 cm ( 19 inch ) rackmount device in 1U format, making it suitable for use in standard racks in enterprise, campus networks, and other demanding environments.
Applications
The ICX8200-24ZP is designed for high-performance networks requiring high end-device density and future-proof architecture. It is particularly well-suited for enterprise networks, campus infrastructures, and environments where Wi-Fi 6/6E/7 access points are deployed. The combination of Multigigabit ports and 25G uplinks enables efficient data transfer and reduces bottlenecks in networks with high data traffic. Support for Layer 3 routing also allows for flexible network design with complex routing structures.
Features and Specifications in Detail
The switch features 24 RJ-45 ports, each supporting a speed of 2.5 Gbit/s and equipped with PoE++ (802.3bt). The PoE budget of 740 W enables power delivery to high-performance end devices without requiring additional power sources. The four SFP28 ports offer uplink performance of 25 Gbit/s and are intended for connection to a high-speed backbone. Full Layer 3 functionality supports routing protocols and enables detailed network control.
Technology Explained Simply
Multigigabit technology (2.5G) provides higher bandwidth than conventional Gigabit ports, allowing more data to be transmitted simultaneously. PoE++ (802.3bt) delivers up to 90 W per port, sufficient to power high-performance devices such as modern access points or IP cameras. The 25G uplinks via SFP28 modules ensure fast connection to the network backbone and support the requirements of modern, data-intensive applications. Layer 3 functionality enables routing between different network segments and thus offers greater flexibility in network design.
Compatibility and Accessories
The Ruckus ICX8200-24ZP is optimized for use with Wi-Fi 6/6E/7 access points and thus supports the requirements of modern WLAN infrastructures. Compatible accessories, such as a rack-mount kit for ICX7750/7450/7250/8200 switches, are available and enable secure mounting in the rack. Compatibility with these models ensures uniform installation and management in existing networks.
Mounting and Installation
The switch is designed as a 48,3 cm ( 19 inch ) rackmount device in 1U format and can therefore be installed in standardized server and network racks. Mounting is done via the designated mounting points, with the rack-mount kit optionally available to facilitate installation. Cabling is performed via the RJ-45 ports for end devices and the SFP28 ports for uplinks.
Operational Advantages
The ICX8200-24ZP offers high performance and scalability for modern networks. The combination of Multigigabit ports and 25G uplinks reduces bottlenecks and enables efficient data transfer. Layer 3 functionality provides flexibility in network design and supports complex routing scenarios. The future-proof architecture ensures long-term usability and adaptability to future requirements.