Ruckus 1G-SFP-TWX-0501

Ruckus 1G-SFP-TWX-0501 switch module 1G SFP copper cable 5 m

Networks > Switches

Ruckus 1G-SFP-TWX-0501 switch module 1G SFP copper cable 5 m

Lieske Part No. 1191060
Mfg Part No 1G-SFP-TWX-0501
EAN-Code
Manufacturer Ruckus
Here only 278,56 EUR
331,49 EUR incl. VAT

Further information for Ruckus 1G-SFP-TWX-0501 switch module 1G SFP copper cable 5 m

General
Connection typeSFP
Cable typeDirect Attached Copper Cable
ApplicationStacking Cable
CompatibilityRuckus ICX-switch models
The product is a Direct Attached 1G SFP Copper Cable from the brand Ruckus, specifically developed for use in managed switches of the ICX series. It is a Stacking Cable with a length of 5 meters, designed to connect switch modules within a switch stack. The cabling is done via copper conductors in SFP format, enabling a Gigabit Ethernet connection (1000 Mbit/s). This type of cable is typically used in network infrastructures where multiple switches are logically connected into a single unit to enable centralized management and higher port density.

Applications

The cable is primarily designed for use in Gigabit Ethernet networks, particularly in environments where multiple switches are connected via a Stacking function. This is common in medium to large enterprise networks requiring centralized network management and high port availability. The use of SFP connectors allows for flexible integration into existing switch systems that feature corresponding SFP ports. The 5-meter length provides sufficient clearance for cabling between switch devices installed in a data center, server room, or network enclosure.

Functions and Features in Detail

The cable is designed as a Direct Attached Copper Cable, meaning it contains no optical components and operates solely via copper conductors. It is directly inserted into the SFP ports of the switches and enables a Gigabit Ethernet connection with a bandwidth of 1000 Mbit/s. The use of SFP connectors ensures a compact and standardized interface, commonly found in many modern switch models. The designation Stacking Cable indicates that it is specifically designed for connecting switch modules within a stack system, enabling joint management and shared VLAN management.

Technology Explained Simply

The cable uses the SFP format (Small Form-factor Pluggable), a standard for modular network interfaces used for both optical and electrical connections. In this case, it is an electrical SFP module operating via copper conductors. The data transfer rate of 1000 Mbit/s corresponds to the Gigabit Ethernet standard, sufficient for data exchange between switches in a stack. The length of 5 meters is suitable for use in typical server or network rooms, where switch devices may be installed several meters apart. The connection is made via RJ45 connectors at both ends, which are inserted into the SFP ports of the switches.

A Stacking connection allows multiple switches to be logically combined into a single unit. This simplifies network management, as all switches can be controlled via a single IP address. Additionally, VLANs, QoS settings, and other network configurations can be centrally managed. The cable serves as the physical link between the switch modules.

Compatibility and Accessories

The cable is specifically developed for Ruckus ICX switch models that feature SFP ports for stacking connections. It is designed as a Direct Attached Copper Cable, meaning it is not compatible with optical SFP modules. Its use is limited to switch systems that support stacking functionality and have corresponding SFP ports for copper connections. No additional accessories or adapters are required — the cable is directly inserted into the SFP ports of the switches.

Installation and Mounting

Installation is done by simply inserting the cable into the SFP ports of the switches. The connection is passive and requires no additional power supply or configuration. The physical connection is secured by the mechanical fit of the SFP connector. The 5-meter length allows for flexible placement of switch devices within an enclosure or server room. No special tools or additional configuration are required — the connection is automatically recognized once the cable is inserted into the ports.

Operational Advantages

Using a Direct Attached Copper Cable offers the advantage of a cost-effective and reliable connection between switch modules. Compared to optical SFP modules, it is more affordable and requires no additional power supply. The Gigabit Ethernet connection provides sufficient bandwidth for stacking communication. The 5-meter length offers sufficient flexibility for switch placement without requiring additional extenders or adapters. The simple installation and direct use without additional configuration simplify network installation and maintenance.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1191060
qrcode für Ruckus 1G-SFP-TWX-0501 switch module 1G SFP copper cable 5 m