| General |
| Material | Enclosure and mounting plate: aluminium AIMg3, door inner enclosure: stainless steel 1.4301 (AISI 304) |
| Surface protection | Housing: powder-coated, UV-resistant pure polyester |
| Colour | RAL 7035 |
| Scope of delivery | Double-walled outdoor enclosure, fully pre-assembled, inner enclosure with mounting plate, flange plate and safety lock, mounting brackets for cabinet internal temperature controller or hygrostat, outer enclosure with design hood and safety lock 3524 E, 2 C-profile rails on rear wall |
| Width | 530 mm |
| Height | 700 mm |
| Depth | 265 mm |
| Light dimensions | Clear width: 440 mm, clear height: 545 mm, clear depth: 195 mm |
| Mounting plate dimensions (W x H) | 430 mm x 535 mm |
| Internal housing | Width: 460 mm, height: 565 mm, depth: 220 mm |
| Lock | Closure type: latch, number of closures: 2 |
| Degree of protection IP according to IEC 60 529 | IP 55 |
| Note | lead time on request |
| Base material | Aluminium |
The Rittal Outdoor wall-mounted enclosure CS 9791035 is a double-walled enclosure for mounting on walls or poles, designed for outdoor use. It features a housing-in-housing concept, where an inner housing made of stainless steel 1.4301 (AISI 304) is integrated within an outer aluminium housing made of AIMg3. The outer housing is powder-coated in the colour RAL 7035, providing a UV-resistant and weatherproof surface. Dimensions are 530 mm width, 700 mm height, and 265 mm depth, with clear internal dimensions for equipment installation of 440 mm width, 545 mm height, and 195 mm depth. The inner housing itself measures 460 mm width, 565 mm height, and 220 mm depth. The aluminium mounting plate (2 mm thickness) measures 430 mm × 535 mm and allows for component mounting.
Applications
This enclosure is designed for industrial applications outdoors, where protection against dust, splashing water, and mechanical impacts is required. The protection rating IP 55 according to IEC 60 529 ensures a high level of protection against dust and splashing water from all directions, making it suitable for outdoor installations. The construction with fin embossing on the rear wall and side panels, as well as a cutout at the lower housing base, ensures efficient ventilation to prevent overheating of installed components.
Functions and Equipment in Detail
The enclosure is fully pre-assembled and includes an inner housing with mounting plate, gland plate, and safety locking. The inner housing door is made of stainless steel 1.4301 and features a foamed-in seal and bolted hinges, enabling an opening angle of 180°. The locking system uses a cam lock with safety locking, with two locks provided. The outer housing features a removable design hood with a grip recess access. Two C-profile rails are mounted on the rear wall, allowing attachment of pole mounting brackets or other components.
Technology Explained Simply
The housing-in-housing concept provides double protection: the outer housing protects against environmental influences, while the inner housing shields electrical or electronic components from direct weather and mechanical stress. The fin embossing and air openings at the base enable natural convection ventilation, maintaining stable internal temperature. The powder-coated surface made of UV-resistant pure polyester ensures long service life even under intense sunlight. The aluminium mounting plate provides a stable base for mounting enclosure internal temperature controllers, hygrostats, or other control elements.
Compatibility and Accessories
Various accessories are available for use with this enclosure, including an enclosure internal temperature controller, a hygrostat, an RTT enclosure heater (23–30 W, 110–240 V AC), a compact LED system light with associated connection accessories and a power adapter (100–230 V), and an AX pole mounting bracket 2584100. These components can be used for temperature control, lighting, or pole mounting, enhancing the enclosure’s functionality.
Mounting and Installation
Mounting is done on a wall or pole, with the C-profile rails on the rear wall of the outer housing used for attaching pole mounting brackets. The mounting plate inside the inner housing allows for securing electrical components. The pre-assembled construction reduces installation effort, as no additional assembly work is required on the housing components. The safety locking and cam lock closure system ensure secure access and prevent unauthorized openings.
Operational Advantages
The enclosure offers a high protection rating (IP 55) against dust and splashing water, making it suitable for outdoor use. The integrated ventilation via fin embossing and base openings maintains stable internal temperature, extending the service life of installed components. The powder-coated surface made of UV-resistant pure polyester ensures high resistance to weathering. The pre-assembled design reduces installation time and minimizes errors during assembly. The integrated mounting plate and C-profile rails allow flexible and secure mounting of additional components.