| General |
| Material | Enclosure and mounting plate: aluminium AIMg3, door inner enclosure: stainless steel 1.4301 (AISI 304) |
| Surface protection | Housing: powder-coated, UV-resistant pure polyester |
| Colour | RAL 7035 |
| Scope of delivery | Double-walled outdoor enclosure, fully pre-assembled, inner enclosure with mounting plate, flange plate and safety lock, mounting brackets for cabinet internal temperature controller or hygrostat, outer enclosure with design hood and safety lock 3524 E, 2 C-profile rails on rear wall |
| Width | 370 mm |
| Height | 522 mm |
| Depth | 210 mm |
| Light dimensions | Clear width: 280 mm, clear height: 380 mm, clear depth: 145 mm |
| Mounting plate dimensions (W x H) | 270 mm x 380 mm |
| Internal housing | Width: 300 mm, height: 400 mm, depth: 170 mm |
| Lock | Closure type: push-in, Number of closures: 1 |
| Degree of protection IP according to IEC 60 529 | IP 55 |
| Note | lead time on request |
| Base material | Aluminium |
The Rittal outdoor wall-mounted enclosure CS 9791015 is a double-walled enclosure designed for mounting on walls or poles. It features a house-in-house concept, where an inner enclosure made of stainless steel 1.4301 (AISI 304) is integrated within an outer aluminum enclosure made of AIMg3. The enclosure is designed for outdoor use and provides protection against dust and splashing water according to protection class IP 55 per IEC 60 529. The outer enclosure surface is powder-coated with UV-resistant pure polyester in the color RAL 7035, ensuring high resistance to weathering influences.
Applications
This enclosure is suitable for use in industrial installations where secure and weatherproof protection of electrical or electronic components is required. It can be mounted on walls or poles and is designed for outdoor use, where ventilation of the internal components is necessary. The louvered embossing on the rear wall and side panels, along with the hole rows on the enclosure base, ensure efficient ventilation to prevent overheating of installed devices.
Functions and Equipment in Detail
The enclosure is fully pre-assembled and includes an inner enclosure with a mounting plate, gland plate, and a safety locking mechanism. The mounting plate made of 2 mm aluminum has dimensions of 270 mm x 380 mm and provides sufficient space for mounting components. Two C-profile rails are mounted on the rear wall, which can be used for mounting accessories such as pole mounting brackets or thermostats. The door of the inner enclosure is made of 1.5 mm stainless steel, features a foamed seal, and allows an opening angle of 180°. The locking mechanism uses a deadbolt with integrated safety locking.
Technology Explained Simply
The house-in-house concept ensures that sensitive electronic components within the inner enclosure are protected from external influences, while the outer enclosure provides mechanical stability and weather resistance. Ventilation is achieved through louvered embossing on the sides and rear, as well as hole rows on the enclosure base, ensuring continuous air circulation. The powder-coated surface in RAL 7035 offers high resistance to UV radiation and weathering, extending the enclosure’s service life.
Compatibility and Accessories
Various accessories are available for this enclosure to extend its functionality. These include a thermostat for enclosure internal temperature control, a hygrostat, an LED compact system light with adapter power supply, and an RTT enclosure heater. These components can be used for temperature control, lighting, or humidity regulation within the inner enclosure. The mounting brackets included in the delivery allow for the installation of thermostats or hygrostats on the inner side.
Mounting and Installation
The enclosure is designed for wall or pole mounting. The rear side of the outer enclosure features two C-profile rails, to which a pole mounting bracket can be attached. Installation is carried out using the pre-mounted mounting elements, with the exact installation instructions following the manufacturer’s guidelines. The design hood on the outer enclosure is removable and provides access to the safety locking mechanism.
Operational Advantages
The enclosure offers high mechanical stability and weather resistance due to the combination of aluminum and stainless steel. The IP 55 protection class ensures reliable protection against dust and splashing water. The integrated ventilation prevents overheating of installed components. The pre-assembled design reduces on-site installation time, and the integrated C-profile rails allow flexible adaptation to various requirements. The safety locking mechanism ensures secure access to the inner enclosure.