| General |
| Material | Thermosetting plastic, flammability rating according to UL 94-V0 |
| Colour | Similar to RAL 9005 |
| Scope of delivery | Including mounting hardware |
| Suitable for busbars | 50 x 10 mm |
| Center-to-center spacing of busbars | 80 mm |
| Mounting note | Maximum 4 busbars (partial conductors) can be installed per phase; for mounting the busbar holder to the cabinet profile, the cage nut (M8) 4165.500 is required |
The SV 9686030 from Rittal is a
busbar holder for baying 3- or 4-pole busbar systems made of flat copper in the roof area of enclosure to enclosure. It serves for the safe and structured connection of power distribution systems in industrial enclosures and enables continuous power supply across multiple enclosures. The holder is made of
thermosetting plastic with flame behaviour according to UL 94-V0, ensuring high flame resistance and low smoke development under heat stress. The colour corresponds approximately to RAL 9005, a dark grey that integrates well in industrial environments.
Applications
The busbar holder is specifically designed for use in the roof area of enclosures, where it establishes the electrical connection between adjacent enclosures. It is commonly used in industrial plants, such as in manufacturing technology, power supply, or automation systems, where stable and secure power distribution across multiple units is required. Baying is performed using flat copper busbars with dimensions 50 x 10 mm, with a centre-to-centre spacing of 80 mm.
Functions and Equipment in Detail
The holder is designed for mounting up to four busbars (partial conductors) per phase, enabling high flexibility in dimensioning the power supply. It includes
mounting hardware in the delivery scope, ensuring secure mounting to enclosure profiles.
Technology Explained Simply
The thermosetting plastic offers high mechanical stability and resistance to chemical influences, making it suitable for use in industrial environments. The UL 94-V0 approval ensures that the material is not easily flammable under heat stress and does not propagate flame. The holder’s construction allows precise alignment of the busbars with a fixed centre-to-centre spacing of 80 mm, ensuring uniform and secure connection.
Compatibility and Accessories
The holder is specifically designed for busbars with dimensions 50 x 10 mm. Compatible accessories include the busbar E-Cu 50x10 mm (length 2400 mm), VX cage nuts M8, SV longitudinal connectors in heights 55 mm and 100 mm (for 1x and 2x/4x50x10 mm), and the SV end cap for busbar holder 9686.0X0. These components enable complete and secure installation of busbar systems.
Mounting and Installation
Installation takes place in the roof area of enclosures, where the holder is fastened to the enclosure profiles. The use of cage nut M8 (4165.500) is required to securely fix the holder. The busbars are inserted into the holder, ensuring the centre-to-centre spacing of 80 mm is maintained. The maximum of four busbars per phase allows flexible dimensioning of the power supply.
Operational Advantages
The SV 9686030 provides a reliable and secure connection of power distribution systems across multiple enclosures. The use of flat copper busbars ensures low resistance heat and high current-carrying capacity. The robust construction from thermosetting plastic ensures long service life and resistance to industrial stresses. The clear structuring of the baying facilitates maintenance and inspection of the system.