| General |
| Material | Thermosetting plastic, flammability rating according to UL 94 |
| Colour | Similar to RAL 9005 |
| Scope of delivery | Including mounting hardware |
| Suitable for busbars | 30 x 10 mm |
| Center-to-center spacing of busbars | 80 mm |
| Mounting note | Maximum 4 busbars (partial conductors) can be installed per phase; for mounting the busbar holder to the cabinet profile, the cage nut (M8) 4165.500 is required |
The Rittal SV 9686010 is a
busbar holder for use in the roof area of enclosures. It is designed for the passage of busbar systems and is specifically intended for mounting E-Cu busbars with dimensions 30 x 10 mm. The holder is
4-pole designed, with a center-to-center distance of 80 mm between individual busbars. It is made of
thermosetting plastic, which, according to UL 94-V0, exhibits high flame resistance, making it suitable for use in electrical installations. The color corresponds approximately to RAL 9005, a dark gray that integrates well in industrial environments.
Applications
The busbar holder is used in power distribution within enclosures, particularly where busbars must be routed through the roof of the enclosure. It is designed for use in industrial electrical installations where secure and orderly routing of conductors is required. The construction allows for stable fixation of the busbars, minimizing mechanical stress and movement of the conductors.
Functions and Equipment in Detail
The holder is designed for mounting up to four busbars per phase, enabling flexible use for different power requirements. The packaging unit includes two pieces of the busbar holder, with the mounting hardware already included in the delivery scope. The choice of thermosetting plastic ensures high mechanical stability and resistance to environmental influences.
Technology Explained Simply
The thermosetting plastic from which the holder is made is a hard, dimensionally stable material, characterized by high heat and chemical resistance. The flame resistance according to UL 94-V0 means that the material extinguishes quickly when exposed to flame and does not propagate flames, which is an important safety feature in electrical installations. The dimension 30 x 10 mm refers to the cross-sectional dimensions of the compatible busbars, made of electrolytic copper (E-Cu). The center-to-center distance of 80 mm is standardized and enables compatible mounting with other components in the enclosure.
Compatibility and Accessories
The busbar holder is specifically designed for busbars with dimensions 30 x 10 mm. As compatible accessories, the E-Cu 30x10 mm busbar, L=2400 mm, is offered, which can be directly inserted into the holder. Additionally, the SV end cap for busbar holder 9686.0X0 is available to cover the ends of the busbars and enhance safety.
Mounting and Installation
The busbars are inserted into the holder, ensuring the center-to-center distance of 80 mm is maintained. Up to four busbars (partial conductors) can be mounted per phase. Installation takes place in the roof area of the enclosure, ensuring mechanical stability and correct alignment of the busbars.
Advantages in Operation
The use of the Rittal SV 9686010 enables structured and secure routing of busbars within the enclosure. The high mechanical stability of the thermosetting plastic ensures long service life and resistance to mechanical stress. The clear structuring of conductors facilitates maintenance and inspection of the installation. Compatibility with standardized busbars and accessories ensures easy integration into existing systems.