| General |
| Material | Sheet steel, 1.5 mm |
| Surface protection | Structured lacquer |
| Colour | RAL 7035 |
| Scope of delivery | Front panel, partition, including mounting hardware |
| Height | 100 mm |
| Suitable for | Width: = 1.200 mm |
| PCF/VE (Cradle-to-Gate) | 12.3 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal SV 9682332 is a front trim panel for VX control panels, specifically designed as a lower closure when used with partial doors. The product enables modular design of the front side of enclosures and provides a clean, uniform appearance. The front trim panel is manufactured from steel sheet with a thickness of 1.5 mm and features a surface finish of textured paint in the colour RAL 7035, ensuring a robust and even coating. The dimensions are a height of 100 mm and a width of 1,200 mm, making it specifically designed for enclosures with a width of 1,200 mm.
Applications
The front trim panel is intended for use in industrial enclosures, particularly in combination with partial doors, to provide a visually finished front side. It is commonly used in automation technology, power supply systems, or process control applications where a clear and structured front design is required. The construction allows for easy installation and maintenance, as the panel can be removed from the outside by loosening the screws without needing to open the entire enclosure.
Functions and Equipment in Detail
The SV 9682332 is supplied with a partition strip and the necessary mounting hardware. The partition strip provides mechanical stabilization and ensures a secure connection between the front trim panel and the enclosure housing. Mounting is achieved using screws included in the delivery scope. The front trim panel is designed for easy installation and can be fitted without additional tools or components. The textured paint surface offers high resistance to mechanical stress and environmental influences.
Technology Explained Simply
The steel sheet material with a thickness of 1.5 mm ensures sufficient strength and stability to protect the front trim panel even under industrial conditions. The RAL 7035 colour is a grey, slightly textured paint that integrates well into industrial environments. The textured coating prevents dust accumulation and facilitates cleaning. The height of 100 mm and width of 1,200 mm are matched to standard dimensions of VX control panels to enable precise fitting.
Compatibility and Accessories
The front trim panel is specifically designed for enclosures with a width of 1,200 mm and is used in combination with partial doors. It is part of Rittal’s modular system accessories and can be combined with other front trim panels and partition strips from the same system to achieve a consistent front design. The use of partial doors allows targeted access to specific areas of the enclosure, while the front trim panel closes off the lower section.
Installation and Mounting
Mounting is performed by securing the front trim panel to the lower edge of the enclosure, with the partition strip serving as the mechanical connection. The screws included in the delivery allow for secure and simple fastening. The front trim panel can be removed from the outside, facilitating maintenance and inspection of components behind it. No additional tools or mounting aids are required.
Operational Advantages
The front trim panel provides a clean and professional appearance for enclosures equipped with partial doors. The simple installation and maintenance reduce labour effort during installation and servicing. The use of steel sheet and textured paint ensures high mechanical strength and durability, even in demanding industrial environments. The modular design allows flexible adaptation to different enclosure design requirements.