| General |
| Model | Closed |
| Material | Sheet steel, 1.5 mm |
| Surface protection | Structured lacquer |
| Colour | RAL 7035 |
| Scope of delivery | Including mounting hardware |
| Height | 300 mm |
| Suitable for | Width: = 400 mm |
| PCF/VE (Cradle-to-Gate) | 8.6 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal SV 9682324 is a
front trim panel for enclosures of the VX series, specifically designed as an
upper closure when using partial doors. The product enables modular design of the front side of enclosures and provides a clean, uniform appearance. The front trim panel is
closed and offers a
protection rating IP 54, ensuring dust and splash water protection. This makes it suitable for use in industrial environments where certain mechanical and atmospheric loads are expected. The dimensions are
400 mm width and 300 mm height, with the width precisely matched to enclosures with a width of 400 mm. The front trim panel is made of
sheet steel with a thickness of 1.5 mm, ensuring sufficient stability and durability. The surface is coated with a
structured paint, forming a robust and scratch-resistant layer, and the color corresponds to the standard
RAL 7035, a gray shade commonly used in industry.
Applications
The front trim panel is primarily intended for use on enclosures of the VX series, especially when partial doors are installed. It serves as an upper closure for front design and prevents exposed edges or unprotected areas from being visible. Installation is done using mounting screws, which are included in the delivery scope. The front trim panel can be removed from the outside by loosening the screws, enabling maintenance or replacement without additional tools or damage to the front. Installation is carried out on the existing partition ribs included with the partial doors.
Functions and Equipment in Detail
The front trim panel is
closed, meaning it contains no openings or cutouts for controls or displays. It serves purely decorative and protective purposes. The
structured paint finish ensures an even surface that better withstands mechanical stresses such as scratches or abrasion compared to smooth paint finishes. The color
RAL 7035 is an industry standard and enables visual harmonization with other components.
Technology Explained Simply
The protection rating
IP 54 means the front trim panel is protected against dust (dust-protected, class 5) and against splashing water from any direction (class 4). This makes it suitable for indoor areas with increased contamination risk or occasional water contact, such as in production halls or on machines. The material
sheet steel (1.5 mm) provides sufficient strength to withstand mechanical loads such as touches or minor impacts without deformation. The
structured paint finish increases surface hardness and reduces susceptibility to scratches.
Compatibility and Accessories
The front trim panel is specifically designed for enclosures of the VX series with a width of
400 mm. It is used in combination with
partial doors, with installation carried out via the partition ribs included in the delivery scope of the partial doors. The front trim panel is not suitable for other widths or enclosure types. The use of partial doors is a prerequisite, as the front trim panel serves as an upper closure and does not include its own mounting elements.
Installation and Mounting
Installation is done using mounting screws, which are included in the delivery scope. The screws are inserted into the pre-drilled holes of the front trim panel and tightened onto the partition rib of the partial door. The front trim panel can be removed from the outside by loosening the screws. This allows for easy maintenance or replacement without the need to open the entire enclosure or use additional tools.
Operational Advantages
The front trim panel provides a clean, uniform front design, enhancing the industrial appearance of the enclosure. The
IP 54 protection class ensures sufficient protection against dust and splashing water, increasing service life and reliability. The
structured paint finish and
sheet steel ensure high mechanical stability and durability. The simple mounting and dismounting facilitate maintenance and replacement without requiring additional tools or modifications to the enclosure structure.