| General |
| Material | Sheet steel, 2 mm |
| Surface protection | Structured lacquer |
| Colour | RAL 7035 |
| Scope of delivery | Partition door, partition web, hinges, locking parts, including fastening material |
| Note | Maximum opening angle of partition doors 130° |
| Lock | Number of locks: 3 |
| Width | 400 mm |
| Height | 1.000 mm |
| Suitable for | Width: = 400 mm |
| Degree of protection IP according to IEC 60 529 | IP 54 |
| PCF/VE (Cradle-to-Gate) | 33 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal SV 9682140 is a partial door for VX enclosures, designed as a replacement for a complete door or rear panel. It enables flexible partitioning of the enclosure interior and can be combined with additional partial doors to create custom separations. The door has a width of 400 mm and a height of 1,000 mm and is specifically designed for enclosures with a width of 400 mm. Installation is carried out using integrated hinges, which can be mounted on the right or left side, ensuring an adjustable door swing direction. The maximum opening angle of the partial door is 130°, providing sufficient access to the enclosure interior.
Applications
The partial door is used in industrial plants, electrical engineering, and automation technology, where modular and flexible enclosure configurations are required. It is suitable for delineating specific areas within an enclosure, for example, to separate control and power sections or to improve accessibility to individual components. Its use in VX enclosures enables standardized integration into existing systems.
Functions and Equipment in Detail
The SV 9682140 is made of sheet steel with a thickness of 2 mm and is coated with a textured paint in the color RAL 7035. This surface coating provides high mechanical stability and resistance to wear. The door is equipped with a standard double-bar lock insert, which includes three locks. This lock can be replaced with lock inserts of type A, allowing adaptation to specific security requirements. The delivery scope includes the partial door, a partition strip, hinges, lock components, and the necessary mounting hardware.
Technology Explained Simply
The protection rating IP 54 according to IEC 60 529 protects the partial door against dust and splashing water, making it suitable for use in industrial environments where some contamination or moisture exposure is expected. The IP rating ensures that no solid foreign objects larger than 1 mm can enter and that splashing water from any direction cannot penetrate the interior. The use of 2 mm thick sheet steel ensures sufficient mechanical strength to protect the door against mechanical stress.
Compatibility and Accessories
The partial door is specifically designed for VX enclosures with a width of 400 mm. Front trim panels are required at the top and bottom of the partial door to ensure a clean appearance. Suitable accessories include front trim panels in dimensions 400x100 mm and 400x300 mm, which also comply with IP 54. Additionally, lock inserts made of zinc die-cast with a length of 27 mm can be used to modify the lock. For mounting monitors in doors without a viewing window (height 600–1000 mm), the monitor frame 2305.000 is suitable.
Installation and Mounting
Installation of the partial door is carried out using the hinges and mounting hardware included in the delivery scope. The doors can be freely combined with each other, with mounting taking place at the designated mounting points of the VX enclosure. The optional right- or left-hand door swing direction allows flexible adaptation to the specific enclosure configuration. The maximum opening angle of 130° ensures sufficient access for maintenance and servicing.
Operational Advantages
The modular design of the partial door enables flexible and customizable enclosure planning. The IP 54 protection rating provides sufficient protection against dust and splashing water, increasing reliability in industrial applications. The interchangeable locks allow security functions to be adapted to specific requirements. The use of 2 mm thick sheet steel and textured paint ensures high mechanical stability and durability. The integrated hinges and included mounting hardware reduce installation time and simplify the setup process.