Rittal 9682126, EAN: 4028177928787

Rittal 9682126 SV partition door for VX 1200x600 mm

Industrial Material > Enclosures / Chassis > System Accessories

Rittal 9682126 SV partition door for VX 1200x600 mm

Lieske Part No. 591443
Mfg Part No 9682126
EAN-Code 4028177928787
Manufacturer Rittal
Here only 119,26 EUR
141,92 EUR incl. VAT

Further information for Rittal 9682126 SV partition door for VX 1200x600 mm

General
MaterialSheet steel, 2 mm
Surface protectionStructured lacquer
ColourRAL 7035
Scope of deliveryPartition door, partition web, hinges, locking parts, including fastening material
NoteMaximum opening angle of partition doors 130°
LockNumber of locks: 2
Width1.200 mm
Height600 mm
Suitable forWidth: = 1.200 mm
Degree of protection IP according to IEC 60 529IP 54
PCF/VE (Cradle-to-Gate)57.8 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal SV 9682126 is a partial door for VX enclosures, designed as a replacement for a complete door or rear panel. It enables flexible partitioning of the enclosure interior and can be combined freely with other partial doors. The door has a width of 1,200 mm and a height of 600 mm and is specifically designed for enclosures with a width of 1,200 mm. Installation is carried out using integrated hinges, allowing an opening angle of up to 130°. The door swing can be selected as either right or left, enabling adaptable installation for different enclosure configurations.

Partial door for VX enclosures is manufactured from sheet steel with a thickness of 2 mm. The surface is coated with a textured paint, providing a robust and uniform appearance. The colour corresponds to standard RAL 7035, a grey tone commonly used in industrial environments. The protection rating IP 54 according to IEC 60 529 ensures protection against dust and splashing water, making the door suitable for use in industrial facilities where certain environmental stresses are expected.

Functions and equipment in detail include a standard double-barrel lock insert, providing two locking points. This is interchangeable with lock inserts of type A, allowing adaptation to specific security requirements. The delivery scope includes the partial door itself, a partition strip, hinges, locking components, and the necessary mounting hardware. This complete set simplifies installation without requiring additional purchases.

Technology explained clearly shows that the partial door is not only a mechanical partition but also a functional enhancement for enclosure design. The use of 2 mm thick sheet steel ensures sufficient stability, while the textured paint coating provides high abrasion resistance and corrosion protection. The IP 54 protection rating means the door is protected against dust and splashing water, making it suitable for use in production environments or outdoor areas, provided there is no continuous water exposure.

Compatibility and accessories include use with other partial doors and front trim panels. At the top and bottom ends of the partial door, a front trim panel is required to ensure a clean appearance. Suitable front trim panels are available, for example, for the upper and lower sections with dimensions 1200x300 mm and 1200x100 mm. Additionally, lock inserts made of zinc die-cast with a length of 27 mm can be used to enhance security. For doors without a viewing window and a height of 600 to 1000 mm, the installation of monitor frame 2305.000 is possible, enabling integration of control or display units.

Mounting and installation is carried out using the hinges and mounting hardware included in the delivery scope. The doors can be mounted on either the right or left side, allowing flexible arrangement within the enclosure. The maximum opening angle of 130° ensures good access to the interior of the enclosure. The use of front trim panels at the top and bottom ends is necessary to ensure optical and functional completeness.

Operational advantages lie in the flexibility of arrangement and easy installation. The partial door enables modular design of enclosures, optimising the use of interior space. The IP 54 protection rating provides sufficient protection for many industrial applications. The interchangeability of the lock insert allows adaptation to different security requirements without replacing the entire door. The use of sheet steel and textured paint ensures long service life and low maintenance requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/591443
qrcode für Rittal 9682126 SV partition door for VX 1200x600 mm