| General |
| Material | Sheet steel, 1.5 mm |
| Surface protection | Structured lacquer |
| Colour | RAL 7035 |
| Scope of delivery | Including mounting hardware |
| Suitable for | Width: = 600 mm, Depth: = 800 mm |
The Rittal SV 9681668 is a
roof plate for enclosures of the VX series, designed for an enclosure width of 600 mm and a depth of 800 mm. It serves as a replacement for the standard roof or as an addition for enclosures originally delivered without a roof plate. The product is specifically designed for use in industrial environments where a
protection rating IP 55 is required to protect against dust and splashing water. The construction from
steel sheet with a thickness of 1.5 mm ensures high mechanical stability and durability under industrial conditions.
Applications
The roof plate is primarily intended for enclosures of the VX series, particularly for models with dimensions width 600 mm and depth 800 mm. It can be used in both new installations and the modernization of existing enclosures to ensure protection rating IP 55. Its use is especially beneficial in areas where enclosures are installed outdoors or in humid indoor environments, where effective protection against environmental influences is necessary.
Functions and Equipment in Detail
The roof plate is supplied with
mounting hardware, enabling attachment to the enclosure body. The surface is coated with a
structured paint, providing a robust, abrasion-resistant, and uniform coating. The color corresponds to the standard
RAL 7035, a gray tone commonly used in industrial electrical engineering. The structure of the coating also enhances mechanical durability and prevents the accumulation of dirt.
Technology Explained Simply
The protection rating
IP 55 means that the roof plate is protected against dust (dust-tight) and against splashing water from any direction. This makes it suitable for use in environments with increased humidity or occasional water splashes, for example in production halls, outdoor installations, or areas with cleaning processes. The steel sheet material with 1.5 mm thickness provides sufficient strength to withstand mechanical loads such as wind pressure or light impacts.
Compatibility and Accessories
The roof plate is specifically designed for enclosures of the VX series with the specified dimensions. It is not suitable for other enclosure types or dimensions. Suitable accessories include
transport eyes for VX, TS, SE (4 pieces) and
pressure plugs for roof plates IP 55. The transport eyes facilitate the transport and installation of the enclosure, while the pressure plugs relieve pressure during roof plate installation and ensure a secure connection.
Installation and Mounting
Mounting is carried out using the included mounting hardware. Installation does not require special tools, but secure fastening to the enclosure body is necessary to ensure protection rating IP 55. Mounting should be performed considering static load and environmental conditions.
Operational Advantages
The roof plate provides reliable protection against environmental influences, extending the service life of the enclosure and increasing operational safety. The use of steel sheet with structured paint ensures high corrosion resistance and resistance to mechanical stress. Compatibility with the VX series and easy installation make it a practical replacement or addition for existing installations.